UKPassats

Just popping this up for information so if searching on the forum this info will pop up for others if they need the info on price for 2025.

Clutch & Flywheel replaced after the flywheel was getting rattly. Car was at 134,971 miles on original assembly. Done at my local Independent Garage: https ...

Not sure if you have sorted it, Here's my video of my fix: https://www.youtube.com/watch?v=Np9dYZCrNWA

Used contact cleaner on the blue plugs to remove the rust

Yep, DRLs in lower bumper, may have been turned off by tool if you are not getting any warning or have you tried changing the bulbs, could be failed LEDs with CANBUS cancel. Had that in the past myself.

I had a recon turbo fitted at best turbos for £600: https://best-turbos.co.uk/

Here you go: https://www.ebay.co.uk/itm/374197142812?fits=Plat_Gen%3AB7%7CModel%3APassat&_skw=passat+b7+chrome+rear&itmmeta=01J7X4XXT050FRE5B38G4WCNTP&hash=item571fe3451c:g:p8MAAOSwjbJjryRJ&itmprp=enc%3AAQAJAAAA0HoV3kP08IDx%2BKZ9MfhVJKmgLENsDaK9rHh70dfxs2y0taG ...

I agree with owerr1 this was my issue with all the symptoms you have described

Have you replaced it with an LED bulb ? Should always go out with the bulb being replaced.

Hi - on cold mornings I have a really annoying squeak from the rear lining, left side of my B7 estate . Sounds like a metal clip agitating against the bodywork. Is there a quick fix? The whole side lining looks like a pain to remove, just to lube a clip!


My B7 Estate squeak was from the ...

jayartibee wrote: Tue Apr 16, 2024 5:19 pm Got mine sorted. Bloomin sounder (yes it is in the rear pillar) had gone open-circuit. A new one got the system all working...

Nice one

jayartibee wrote: Mon Apr 08, 2024 2:00 pm Not in the dashboard??

Nope

Parking sensor bleeper is in the pillar behind driver, sot through speakers FYI.

My Eonon Q53pro does and shows on the screen

Is it the same as mine here on this thread, drivers door: viewtopic.php?f=86&t=99175

Steering wheel Shake = Front Balance
Car Shake = Rear Balance

What you got, may help more ?

Door panel off job to be sure, from my past experience any noise on windows is the regulator cable, not expensive and not the worse jobs to do, just fiddly.

Look superb, more Pics please and a video , interested, link also

Can you hear the fuel pump prime ?

May Help, Pin goes through Window Hole Red things were just to hold up window

Apologies yeah the rears have the split dowl which need to be pulled out, getting front and rear doors mixed up. I have done both.

Just trying to find my pics...................

I have the child lock unlocked from inside now and progressing the repair.

Door card off and trying to take off the regulator assembly.

I expected to remove a rubber grommet, lower the window slightly until I see the window securing bolt, tape the window, loosen bolt and remove the regulator ...

hydrocilator wrote: Fri Jan 27, 2023 7:24 pm Many thanks, I will give that a shot.

There is no resistance on the outside handle compared to the working doors. I will know more when I get in there

Bowden Cable has popped of or snapped then. Cheap part

I have a rear passenger door that will not open from the outside since the outside temperature sat at sub zero for a few days.

All door locks were frozen then and I had to use a hairdryer to unlock it.

I reckon the outside handle cable has snapped /slipped off.

Playing around with it yesterday ...

Right car rescanned with the following codes:
P159200. Altitude sensor boost pressure sensor- implausible correlation
P010100 mass or volume air flow circuit range/performance
P023400 turbo, supercharger over boost condition
P023800 turbocharger boost sensor A circuit high input
P067200 cylinder 2 ...

These may Help, Some photos of when I did the job: https://mattluton-my.sharepoint.com/:f:/g/personal/matt_mattluton_co_uk/EnLSlpmgzkdHuqx7Ty6ETdgBzRAtTOrX6F81ONwHm3ZF7w?e=R7CtRa From My Onedrive so you get the full res images

IMG_20211205_133740.jpg
IMG_20211204_104046.jpg
IMG_20211204_104041 ...

Nothing Broke for me, remove the bottom trim where the boot lock is and work upwards to the right. The bit you are prying, remove by pulling upwards.