UKPassats

Thanks for the explanation, makes more sense now with the battery being rechargeable.

I picked up a different battery pack from Ebay last week so I'll try fitting it tomorrow and report back

Sent from my SM-G990B using Tapatalk

My 2010 b6 keeps throwing a 01134 fault code for the alarm horn siren.

I haven't experienced any issues and the alarm still works as it should.

I swapped in a few alarm sirens from scrap yards/ebay and the alarm did not sound on any of them.

I just opened up my one, Battery still reads 6v and ...

Thanks for the reply!

Did you leave yours connected?

Hopefully I'll get the chance to remove mine at the weekend and see what the story is

Sent from my SM-G990B using Tapatalk

Oh that's an idea, never occurred to me to try and replace the battery!
I'll get mine off at the weekend for the part number and go from there.

Mine is still working but not sure why it's throwing a fault

Sent from my SM-G990B using Tapatalk

I have the following fault popping up,
-01134, alarm horn siren fault.

I've had no actual issues other than a possible battery drain.

Contacted vw using part number 1k0951605c to get a price on the part, €350!

So what I'm wondering is, can I fit a generic alarm siren to have everything 100 ...

Just updating this for anyone else that's interested.

Found a post online from a skoda driver with similar issues.
They never got to the route cause but by adding an extra battery ground, it seems to have sorted there car.

So I added 2extra earth straps from the head to the battery on my car.

I ...

I have a 2010 passat estate, 2L tdi.

I have been using a Carley scanner the last few months to track the fault codes.

Not all appear at the same time.

The symptoms I've noticed,

Battery drain/car struggling to start.
Flat battery (replace with new)
Car revs higher at idle (idle drops down if ...

Fixed my fob last night,
The pics and info here was very helpful.

Had to replace 2 microswitch's and I was also missing the little piece of plastic under the lock button.

I had to refit mine without a new piece of plastic glued in.

With the new microswitch and new piece glued in the fob kept ...

Fixed.

They're fixed with small clips and wedged into place

Have them in a b6 estate, we'll worth the money

Mine don't, there just reflectors

Will do, thanks for the advice

Sent from my EML-L09 using Tapatalk

Ah I see, thanks for the clarification.

Having not done it before ide say it'll start to make sense once I do the job.

From what your describing, I presume the front bumper needs to be removed?

Sent from my EML-L09 using Tapatalk

Thanks for the reply!

Yes it's the ac condenser I'm looking to replace.

So front bumper stays, one less thing to worry about.

I'm not too familiar with the b6, what or where are is the bumper cover and what do you mean by putting the car lock carrier into the service position?

Sent from my ...

Need to replace the aircon rad, faied a pressure test as there are a few pin holes.

Car is a 2010 2.0tdi B6

Anyone swapped there's out for a new one??

Im presuming it's bumper off and fairly straight forward then!?

Apart from the new rad, is there anything else needed??

Also wondering who is ...

Cheers, ive been searching aircon rad so thats where ive been going wrong!

Sent from my SM-G920F using Tapatalk

Had come across something from stp to stop the leak but the reviews were hit and miss.

Ide rather sway it out and have it 100%!!

Whats access like for swapping the rad out??
Can it be done with the front bumper in place and the undertray removed?

Sent from my SM-G920F using Tapatalk

Got a pressure test done yesterday and the rad has a pin hole in it.

Waiting on a price to replace/ fit new rad but i was wondering is there something that can be put into the system that will seal the hole?? (Like radweld for the coolant system)

Sent from my SM-G920F using Tapatalk

I have the same issue with my own car.

Any part number or picture of the above item??

Sent from my SM-G920F using Tapatalk

Find a supplier that stocks soudal products.

They do mastics for sealing windows/doors to block/brick/stone etc.

Never had an issue with shrinkage no matter how deap the joint was and they come in a few colours aswell

Sent from my SM-G920F using Tapatalk

Very good rubber!
Never really had much of an issue with traction, all depends on how she was driven!
Car was very well balanced with no expense spared on suspension or bushings

Sent from my SM-G920F using Tapatalk

Yea she wasn't a genuine G60 but the 16v was some laugh!!
She was running 242hp, frightened alot of newer stuff

Sent from my SM-G920F using Tapatalk

Egr and dpf, honestly haven't thought about them. I need to do my research before i make a plan.

The G60 is sold now, firsr year i haven't had a G60 in about 12years!

Pics are the day before i sold her https://uploads.tapatalk-cdn.com/20180303/f4e1402d4a46aef04dea5b259b6585ff.jpg https://uploads ...

Cheers Gaz, makes sense why i couldn't find any info on it!

Yea a map of some sort is on the cards, possibly revo as I know of a garage thats a revo agent but thats a few months down the line

Sent from my SM-G920F using Tapatalk

Have just bought a B6 estate.

Came across the forum while researching possible issues the car may have.

Car is highline, 2.0tdi, 110hp 5speed.

Apart from the standard highline spec she has no extras.

Im trying to find out if my engine is affected by the oil pump balance shaft issue, engine code ...