First section is the centre control that houses the stereo and the heater controls/various switches etc.
Stereo was previously removed, and this is the result:
The climatronic control surround just prises off:
You will need a torx head socket, I used a T15 but I think it was slightly too small, my next size up is missing, but it does the job:
The climatronic unit is held in with 4 torx screws, one at each corner:
Pulls forward when all 4 are removed:
Unclip the plugs:
The centre frame is screwed to the dash underneath along the top edge with 2 torx head screws, one at each side:
And the lower edge at these two screw clips that form part of the climatronic location that need removing (just prise off):
Gently pry the top edge away from the dash:
Finally if you want to remove the cage behind then there are four torx head screws at each corner to remove then the cage comes out:
and that's it, it goes without saying that refitting is a reversal of the process.