Intake upgrades

From engines to interiors , have you a question or can you help, ask and answer here !

Moderators: water01, vwnutant, desertstorm

Post Reply
User avatar
desertstorm
Site Admin
Posts: 10303
Joined: Thu Apr 19, 2007 9:11 pm
Passat model: B5.5 130 TDI AWX
Location: Cannock

Intake upgrades

Post by desertstorm »

Just posted this on a how to.

Looking at ETKA the other day for some information and noticed that on the 5,6 and 8 cylinder cars there is an air duct fitted to the back of the grille to feed high pressure air to the air intake.
Also on the bigger engined cars there are holes cut out in the grille to allow air in unobstructed. I had already modified my grill with a drill. This cheap mod catches more air and diverts it to the intake.
Part required is an air duct part number 3B0853562 and cost me £2.66 from the main dealers. That was with out any discount but I wasn't going to complain at that :D .
It looks like this

Image

And just clips to the back of the existing factory grille.

Image

It then acts to deflect high pressure air upto the air intake. This would have a minmal impact on engine cooling.

Image

And refitted. Must be worth at least 0.5bhp at 120mph :D . VW don't fit these things for no reason at all so somebody somewhere must have decided it was worth it. And at £2.66 and 10 minutes work it's not a lot of effort.

Image

Karl.
Gone but will never be forgotten
207Bhp 347Lb/ft 14.9 seconds 93mph
The build topic viewtopic.php?f=5&t=56110

Image
The new 382bhp Audi viewtopic.php?f=5&t=70765

This topic has 16 more replies

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply