Replacing headlight assembly

something you need to ask , technical help here.

Moderators: water01, vwnutant, desertstorm

Post Reply
inflames
still on the production line
Posts: 18
Joined: Sun Jan 25, 2015 8:05 pm

Replacing headlight assembly

Post by inflames »

Hi all, its MOT time in 2 months and looking at getting a couple of bits sorted before it goes in, like the driver side front roll bar as it has started to rattle in the last couple of weeks and the other has been an advisory for the last 4 years from the looks of the history, iv now had it 18 months and this will my 2nd MOT. The passenger side headlight assembly has something like moss starting to grow inside it? probably due to the condensation that it has, this being the advisory.
Any how whilst doing my monthly checks at the week i had a quick look on how easy or difficult it would be to replace the whole assembly. Is it a case of, disconnecting the plugs, the 2 bolts on top and sliding it out? Or will i be required to remove the front bumper to gain access to a few bolts under the assembly?

This topic has 5 replies

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply