Ok this is a guide to fit led lights to your vents as lit vents are not on all cars.[ A diy way to get vent lights]
So the frist thing to do is remove vents ,this can be done with a 2x eating knifes.
Next you need to remove the front of the vent, it clips off..
Next you need to glue your 3mm LED to the top as in picture..
you need to glue one top and one bottom..
Now after glue set clip back on the vent front and test your lights come on..
After you have all vents done check that all lights work before refitting to the car..
Then just push vents back in making sure to run wires from one vent to the next. my car had the plug on the passager side that IF you did have vent lights it would plug into this plug.
And that it .......
Home made vent lights
Moderators: water01, desertstorm, vwnutant
- gortex
- B6
- Posts: 729
- Joined: Tue Mar 20, 2012 10:40 pm
- Passat model: B5.5 Tdi 4motion
- Location: Cavan, Ireland
Home made vent lights
You Built a Time Machine....................Out of a Delorean