FRONT DOORS STRIPPED AND SOUND PROOFED.
First things was to take the door cards off:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0145.jpg)
Dynamat extreme was applied on the door:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0138.jpg)
And on the inside of the door directly where the speaker was going to be installed:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0149.jpg)
All done:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0148.jpg)
INSTALLATION OF SPEAKERS
Time to install these bad boys JL Audio ZR650s. These were a breeze to install in the passat as no cutting of the door was required as is required in the e46 I had previously:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0193.jpg)
Wanted these to be installed on an mdf ring to create a nice anchor for the speakers to fit in and so that they were pushed as far out of the doors as possible as I wanted the speaker sitting as close to the grill as possible to get maximum mid bass into the car:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0170.jpg)
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0172-1.jpg)
The rings and were painted black:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0189-1.jpg)
All completed:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0201.jpg)
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0197.jpg)
BOOT STRIPPED AND SOUND PROOFED
Next was the boot. All the interior was stripped out:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0175-2.jpg)
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0139.jpg)
Dynamat extreme was added to the right side of the boot:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0141.jpg)
And the left side:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0142.jpg)
Top of the boot:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0143.jpg)
Bottom area, spare wheel was removed:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0144.jpg)
Top of boot lid:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0147.jpg)
All completed:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/IMG_0171.jpg)
WIRING
Next was the cabling. Decided on 0 gauge cabling for the amps:
Battery was taken out first:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/12.jpg)
Power cable was pushed through the existing wiring loom:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/2-1.jpg)
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/5.jpg)
Side panels were taken off:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/4.jpg)
Power lead was cable tied the existing wiring to keep it nice and tidy:
![Image](http://i87.photobucket.com/albums/k134/aaftabbmw/6.jpg)
Final destination