UKPassats

number on metal casing 0-130-821-694 sticker num 119-090-xxx-871 If you have a B5 the CCM will be an 1J0 959 799 AH so any Passat motor that starts with 3B4837752 (driver side part number) should be fine but any motor from a b5 should be fine also. 3B4837752C : http://www.ebay.co.uk/itm/VW-PASSAT-B...

Also check this out for a bit more info: viewtopic.php?t=76237

I copied and pasted the entire article from the 'Members Chat' area and re-titled it...that top picture was put up in my B5 on a budget thread, but knowing that i need the module and relay helps a lot, thanks The only other thing you need to check is the slip ring on your car. The b5 never came wit...

i don't think so...but will check my post history.... I swear iv seen that top pic before, [emoji37] anyway. As far that I can see you have just about everything you need (in the photo) but you are missing the MFSW control unit and relay/control unit holder I have a few of the control units lying a...

Didn't you ask us about this before?

Didn't I tell you what to do?

What car you got? B5/B5.5?

If your 100% the new stalk is working then it can only be 2 other things.

Cluster faulty or faulty wiring. (From stalk to cluster)

The stalk buttons are wired directly into the cluster.

Hope this help [emoji1]

not possible motor is out off car Ah I should have read the post correctly [emoji1] If the motor is removed is there no part number on the metal casing or sticker? The other way is to use Vag-com and get the part number off the ccm info screen. Any b5 motor should will work unless you have been hav...

theredfox wrote:yes motor makes that very annoying sound

Sounds like the cable has got jammed on the motor

have same problem drivers window not work just click don't know if its switch or motor failed test here can get brand motor from Deutscheparts Ltd for £ 185 which they say will work 100% because i gave them the chassis number of car but very reluctant to spend that amount bought motors from member...

You need to pop up the part number of your replacement cluster. As only the right cluster will work on a b5, b5 crossover and b5.5

Elmer Fudd wrote:Thank you for the replies people.

By the looks of the posts, I can buy a used set of locks and a new transponder then get it coded?

Yep that's right

Not trying to bump my for sale stuff but I have a golf mk4 lock set that fits Passat but the rear lock will need the locking pins swapping to your rear barrel. Comes with 2x key http://www.cdgold.co.uk/polo-mk3/ukpassat/forsale/garage_clearance/25.jpg £50 posted The other thing you will need is vir...

Unsure if this can be done in an saloon (but can't see why not) but some work is involved and you will need a rear bench with a rear 3 point seat belt.

Here is how to do a wagon 3 point conversation: viewtopic.php?p=407595#p407595

theredfox wrote:yes if that is possible

Don't think so as the hardware is completely different between can and non can.

You could swap the pcb from b5.5 motor to the b5 one and it would work fine. As the motors are identical apart from pcbs

theredfox wrote:so what does that mean polo that you can code window motor's to suit your ccm if you have vcds????

in what way? B5 to B5.5?

As above really. B5 and B5.5 motors are different but only in the way they talk to the ccm. Vag-com will only tell you what motors are connected to the ccm in the extra bits. 1J0 http://i50.photobucket.com/albums/f319/soundguybob/VagPic.jpg 1C0 http://www.myturbodiesel.com/images/b5/cecm.png Now as ...

Never had any problems with pagid pads or disks (yet) [emoji13]

Anyone seen "Drive (2011 film)"? Go to say poster looks about random but I think its an awesome movie with a big twist in the end with some well know actors. http://upload.wikimedia.org/wikipedia/en/1/13/Drive2011Poster.jpg Its got a wicked toon for driving too: Watch "College & ...

Its low mileage so I would say fix it and everything you have said that is wrong with it is cheap to replace

Hello mate! How im suposed to remove the trim so i can install the B5 Cupholder? Just pops out with a flathead screwdriver from the side? Thanks !! Sent From My Galaxy S CyanogenMod 10.1 The blank is held on by 2 clips on both sides, you need get a precision screwdriver in one side and pop one out ...

http://torque-bhp.com/wiki/Bluetooth_Adapters

I got this one but did not $99 for it was about £5-10 off ebay a few years ago

[img]http://torque-bhp.com/wiki/images/2/2d/Obdp2world.jpg[/img]

Never had any issues

calumvw wrote:Are you using same oil/grade as last time, different oils could be the reason?

Yer, Quantum oil from TPS with VW filter

Touch wood ive never topped up between services ben but as you know I do them every 5k religiously. Maybe if I left it to 10-12k like most do I would see a minor drop in level ? sent from my samsung S5 using tapatalk How did I miss this :shock: lol sorry mike :wink: Well been keeping a close eye on...

Under the scuttle next to the pipes to the heater matrix

Thats the problem with other forums (some can be very miss leading and in my experience pistonheads is one or them) but ones that deals with a make or model like ukpassats with guys that know or have experience with the cars in question. I picked mine up with 172k and 2 and half year now has 204k an...