UKPassats

Hi everyone. I'm looking to buy a torque wrench, while browsing online, spotted digital Torque Wrench Adaptors. for example http://www.ebay.co.uk/itm/Sealey-Tools-STW290-Digital-1-2-Drive-Torque-Wrench-Adaptor-40-200Nm-Memory-New-/200688687627?hash=item2eb9fa5a0b:g:8EYAAOSw9mFWMjjT how accurate are ...

more details of your car needed. i recently bought engine mount for touran, i think its the same as b6. cost me 50quid for Corteco mount.

Hi everyone. well its has been a busy afternoon replacing cv boot again!!! q drive from ECP only lasted 6 months, so i bought GKN boot this time. only 6 months, and it looks like it is a few years old...cheap for a reason i suppose http://i298.photobucket.com/albums/mm274/Eglute111/Touran/20160313_1...

dont start throwing money on new turbo. i have 1.9 tdi touran BKC and its making the same whistle. as long as it not using loads of oil and not smoking, id leave it alone. like ray said, if you're worried start checking the things he pointed out

I had similiar problem with gqn 6speed gearbox. Also clutch pedal was sticking half way. After i replaced both cylinders with no improvement, bled system countless times,ended up fitting second hand gearbox which solved all the issues.

U wont be using a toothpaste my god 600 quid for one unit. Robbery in the daylight.

2 years suits me. The whole j&r driveshaft is alot cheaper than genuine cv joint. Its unbelievable. Probably im going to buy a genuine one, i know my luck buy cheapest and end up doing the job twice. Thanks for comments gents

Hi everyone. Anyone fitted J&R cv joints? How long they last, the price is very low compered to Gkn. I need to get one, j&r says 2 yrs warranty...your comments gents please thanks

http://www.partscats.info/volkswagen/en ... 199200.png

looking at the picture, it looks like one bush needs to go from the top and the other one from the bottom. am i right? or can they both be hammered from the bottom?

all checked today

Before



After


been told that caster on the front not adjustable

Subframe bush mate. I would come out with a hammer , probably pressing a new one in would be a challenge without a press.

Hello everyone. I'm looking to upgrade my subframe bush which has no voids. similar to this http://www.034motorsport.com/images/8_Mk5_DB.jpg powerflex insert not going to work because someone bodged it... this is what it looks like at the moment http://i298.photobucket.com/albums/mm274/Eglute111/Tou...

i bought rtx from eurocarparts 2 years ago, still going strong. u might need to replace pulley only, are u sure it packed up? give us more info about your car please

Probably need to go to get my alignment checked. I had this issue with the old tyres, but new ones not improved anything.

Hello all. I'm still trying to find out why my steering wheel wobbling/shaking lightly above 70mph. I have new front tyres fully balanced, new shocks and springs all round, new brakes all round. Lower arms just had new bushes as well. After all of this work done only slight improvement. Should i get...

Thats very cheap. Thanks for the link. I was thinking about getting 5l of castrol with french label for 30 quid. But will go with this

http://www.partscats.info/volkswagen/en/?i=cat_vag_models&brand=vw&number=1878&set=1916&ein=2008&f=627&hauptgr=1234567890&hg=1&grf=014580460&bf=14580&hgug=145&ug=45&parent_id=2898605 u can buy them on ebay http://www.ebay.co.uk/itm/GENUINE-VW-AUDI-SEAT...

calumvw wrote:

Will UK wrote:my BKC touran has done 180k already, but after reading all this, im worried...

I think if it was going to happen it would've done by now.

i hope so mate

my BKC touran has done 180k already, but after reading all this, im worried...

Done about 3k miles, seems to be good now.

What are they going to do when affected car is recalled back to Vw? Put another software in Ecu so that nobody can detect it... 2.1 mil Audi's involved around the world as well. I bet Seat and Skoda will be next.

Hi everyone. Just had a look at Vw workshop manual and every single bolt or nut is a single use on front suspension. I will be replacing front shocks on my touran soon, so trying to get all the bits for it. How many of you reusing them bolts? Ive never seen a garage to replace any of them unless the...

I bought economy brake discs and pads from tps. And im very impressed with them. 75 quid for it.