thanks to VAGMAN2 for his little write up :
viewtopic.php?f=8&t=49739
hear are some pics for doing this on drivers front door:
cap popped off
![Image](http://i2.photobucket.com/albums/y6/bradharris/DSC_0082-2.jpg)
t20 torx bit required:
![Image](http://i2.photobucket.com/albums/y6/bradharris/DSC_0083-2.jpg)
start un doing the torx bit then by prying on the lock from the out side i found it easier to drop a screw driver handle under the door handle as it slightly covers up the lock
![Image](http://i2.photobucket.com/albums/y6/bradharris/DSC_0084.jpg)
then pull it out:
![Image](http://i2.photobucket.com/albums/y6/bradharris/DSC_0086-1.jpg)
you can just see the little bit thats been causing all the trouble in this photo:
![Image](http://i2.photobucket.com/albums/y6/bradharris/DSC_0087.jpg)
as u can see its right in side the handle so pop it out using screwdriver
![Image](http://i2.photobucket.com/albums/y6/bradharris/DSC_0088.jpg)
i used my little fingers in side the lock to sort of pull the cable out and screwdriver to push it back in:
![Image](http://i2.photobucket.com/albums/y6/bradharris/DSC_0090.jpg)
and its as simple as that put back together in reverse and jobs a good-un