Fitting near rear epb motor, tips after breaking new one!

something you need to ask , technical help here.

Moderators: water01, vwnutant, desertstorm

Post Reply
2008tdihighline
B2
Posts: 230
Joined: Sat Sep 12, 2015 6:35 pm
Passat model: B6

Fitting near rear epb motor, tips after breaking new one!

Post by 2008tdihighline »

Hello, any tips for fitting a new epb motor? I managed to snap one of the fitting points off my new one as it was tight on the new o ring. I noticed some corrosion on the recess for the o ring so the diameter was bigger but even after cleaning it up and seeing if would fit it still wouldn't slide on very well. I could not get it to sit flush so if I was to tighten it up again it would probably snap! I did try some lubrication but made little difference.

Half tempted to get a whole new caliper with a motor fitted but finding the right one and a motor with the correct socket on it seems a mine field for a late 2008. It seems to bring up the motor that has a lug on the connector!

Sent from my SM-G960F using Tapatalk

This topic has 1 reply

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply