Finally I got around to fitting my mfsw. The controls work fine.
The abs control module won't accept the basic settings for the steering angle sensor. when I go into the measuring blocks and turn the wheel it stays on zero.I was expecting the clock spring to a revolution out?
Any ideas before I take the wheel off?
I have a different angle sensor I could use but I doubt that's the problem unless it's not compatible but I would of expected a error message indicating that
. I'm hoping it's not the clock spring because the ones I was going to use have a different connection to the airbag harness b versions
Steering angle 00778 05 not accepting basic settings
Moderators: water01, vwnutant, desertstorm