EPB Fault

[Imran]

Hi all, today when driving the epf wouldnt engage, pressed it and on the dis said parking brake fault, see handbook. Left the car in gear did what i had to do and it seems fine, well, for the time being anyway.

Below is the fault vcds found.

Address 53: Parking Brake Labels: 5N0-907-801.clb
Part No SW: 3C8 907 801 A HW: 3C8 907 801 A
Component: J540 EPB3 VW-10498 0003
Revision: 009 Serial number: 00000000131892
Coding: 0000057
Shop #: WSC 00028 028 00001
VCID: 2855E6799BE83A9

2 Faults Found:
03200 - Switch for Electric Parking Brake (E538)
012 - Electrical Fault in Circuit - Intermittent
Freeze Frame:
Fault Status: 00111100
Fault Priority: 1
Fault Frequency: 1
Reset counter: 189
Mileage: 209094 km
Time Indication: 0
Date: 2013.06.27
Time: 16:11:26

Freeze Frame:
Voltage: 11.90 V
Count: 10
Speed: 0.0 km/h
Hex Value: 0x12E1
Hex Value: 0x0001
Hex Value: 0x1010

16352 - Control Module - Electrical Error
014 - Defective - Intermittent
Freeze Frame:
Fault Status: 00101110
Fault Priority: 1
Fault Frequency: 1
Reset counter: 193
Mileage: 209144 km
Time Indication: 0
Date: 2013.06.29
Time: 16:51:58

Freeze Frame:
Voltage: 13.40 V
Count: 42
Speed: 0.0 km/h
Hex Value: 0x12E0
Hex Value: 0x0001
Hex Value: 0x0101

Is this the start of something major, or is it just the epb button, seen that its an A version, going to order the c version from dealers on monday, is it likely its just the button or the rear calipers are on their way out...

Does anybody know how much the switch is please?

Any advice is appreciated