Bmr oil smoke
Moderators: desertstorm, vwnutant, water01
-
Lee
- Too much time on your hands
- Posts: 2926
- Joined: Wed Feb 27, 2008 3:35 pm
- Passat model: B6 SEL 170
- Location: chester
Bmr oil smoke
Can injector bolts easily be checked for tightness? My engine is running oil into the combustion chambers after shutoff and during running. It's particularly smokey (oil smoke) during warmup with a few mins of rough running at idle when warming up. Also when up to temp after engine shut off for 10 mins plus it's same, lots of oil smoke. BMR engine, 130k. Been like it for long time but getting worse very gradually over time. Oil level falling slowly not rising. Dpf deleted and EGR blanked. I suspect either injector seals and bolts... Injectors changed without renewing bolts or seals or both, or not torqued properly after recall replacement. Any assistance gratefully received please thanks
