reprogramming ABS ECU

VW have now released there NEW passat range. Please add any technical know how or info into here. NO FOR SALE/PARTS/TALK here..

Moderators: water01, vwnutant, desertstorm

Post Reply
Johnc2435
Posts: 4
Joined: Fri Jun 01, 2018 9:27 am
Passat model: B7

reprogramming ABS ECU

Post by Johnc2435 »

Hi all,

I have been having ABS issues which I thought would be abs controller based as i have experienced similar before. I was offered a same part number spare abs pump and controller. I removed the controller from the spare unit and installed on the pump on my car.
On trying to cancel the existing fault codes I have come up with different codes. The replacement controller had different coding and lost settings for stering angle etc. I tried to insert the code from the old controller, which was accepted however I cant find any full method to reprogram the other parts. The you tube videos are too old.
The car is a 2013 passat 2.0tdi.
Could someone tell me the correct procedure for reprogramming the conroller. I have old and new VCDS outputs below. If after reprograming I still have errors I know its not the controller and will have to look at wiring and speed sensors.

Could some one assist me with a programming procedure please.

OLD CONTROLLER OUTPUT

Address 03: ABS Brakes Labels: 3AA-614-109.clb
Part No SW: 3AA 614 109 AQ HW: 3AA 614 109 AQ
Component: J104 C2 450M VD1B 0030
Revision: --H07--- Serial number: 00000006587292
Coding: 0004016
Shop #: WSC 05311 000 00000
VCID: 7CFDEA293FF0469

4 Faults Found:
03841 - RPM Sensor Rear Left: Incorrect Signal
012 - Electrical Fault in Circuit - Intermittent
Freeze Frame:
Fault Status: 00101100
Fault Priority: 3
Fault Frequency: 4
Reset counter: 67
Mileage: 135705 km
Time Indication: 0
Date: 2124.14.28
Time: 07:31:34

Freeze Frame:
Speed: 43.0 km/h
Hex Value: 0x0000
Bin. Bits: 00000000 00000000
Voltage: 14.25 V
Bin. Bits: 00011111
Count: 179
Hex Value: 0x0000

00290 - ABS Wheel Speed Sensor; Rear Left (G46)
008 - Implausible Signal
Freeze Frame:
Fault Status: 00111000
Fault Priority: 1
Fault Frequency: 5
Reset counter: 27
Mileage: 135705 km
Time Indication: 0
Date: 2124.14.28
Time: 07:31:40

Freeze Frame:
Speed: 39.0 km/h
Hex Value: 0x0000
Bin. Bits: 00000000 00000000
Voltage: 14.25 V
Bin. Bits: 00011111
Count: 34
Hex Value: 0x0000

01325 - Control Module for Tire Pressure Monitoring (J502)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 3
Fault Frequency: 10
Reset counter: 27
Mileage: 135705 km
Time Indication: 0
Date: 2124.14.28
Time: 07:31:50

Freeze Frame:
Speed: 28.0 km/h
Hex Value: 0x0000
Bin. Bits: 00000000 00000000
Voltage: 14.25 V
Bin. Bits: 00011111
Count: 191
Hex Value: 0x0000

00287 - ABS Wheel Speed Sensor; Rear Right (G44)
008 - Implausible Signal - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 1
Fault Frequency: 1
Reset counter: 67
Mileage: 135863 km
Time Indication: 0
Date: 2124.14.29
Time: 16:49:06

Freeze Frame:
Speed: 35.0 km/h
Hex Value: 0x0001
Bin. Bits: 00000000 00000000
Voltage: 14.50 V
Bin. Bits: 00011111
Count: 35
Hex Value: 0x0000




NEW CONTROLLER OUTPUT

Address 03: ABS Brakes Labels: 3AA-614-109.clb
Part No SW: 3AA 614 109 AQ HW: 3AA 614 109 AQ
Component: J104 C2 450M VD26 0030
Revision: --H07--- Serial number: 00000007941667
Coding: 0004016
Shop #: WSC 05311 000 00001
VCID: 7CFDEA293FF0469

9 Faults Found:
03841 - RPM Sensor Rear Left: Incorrect Signal
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 1
Fault Frequency: 1
Reset counter: 38
Mileage: 136435 km
Time Indication: 0
Date: 2125.14.04
Time: 03:10:50

Freeze Frame:
Speed: 0.0 km/h
Hex Value: 0x0000
Bin. Bits: 00000000 00000000
Voltage: 11.75 V
Bin. Bits: 00000000
Count: 156
Hex Value: 0x0000

03842 - RPM Sensor Rear Right: Incorrect Signal
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 1
Fault Frequency: 1
Reset counter: 38
Mileage: 136435 km
Time Indication: 0
Date: 2125.14.04
Time: 03:10:50

Freeze Frame:
Speed: 0.0 km/h
Hex Value: 0x0000
Bin. Bits: 00000000 00000000
Voltage: 11.75 V
Bin. Bits: 00000000
Count: 157
Hex Value: 0x0000

01325 - Control Module for Tire Pressure Monitoring (J502)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 3
Fault Frequency: 1
Reset counter: 38
Mileage: 136435 km
Time Indication: 0
Date: 2125.14.04
Time: 03:10:59

Freeze Frame:
Speed: 0.0 km/h
Hex Value: 0x0000
Bin. Bits: 00000000 00000000
Voltage: 11.75 V
Bin. Bits: 00000000
Count: 191
Hex Value: 0x0000

03201 - Adaptation Overboost
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100100
Fault Priority: 3
Fault Frequency: 1
Reset counter: 38
Mileage: 136435 km
Time Indication: 0
Date: 2125.14.04
Time: 03:10:59

00778 - Steering Angle Sensor (G85)
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100100
Fault Priority: 3
Fault Frequency: 1
Reset counter: 38
Mileage: 136435 km
Time Indication: 0
Date: 2125.14.04
Time: 03:10:59

01423 - Lateral Acceleration Sensor (G200)
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100100
Fault Priority: 3
Fault Frequency: 1
Reset counter: 38
Mileage: 136435 km
Time Indication: 0
Date: 2125.14.04
Time: 03:10:59

01279 - Longitudinal Acceleration Sensor (G251)
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100100
Fault Priority: 3
Fault Frequency: 1
Reset counter: 38
Mileage: 136435 km
Time Indication: 0
Date: 2125.14.04
Time: 03:10:59

00810 - Sensor 1/2 for Brake Pressure
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100100
Fault Priority: 3
Fault Frequency: 1
Reset counter: 38
Mileage: 136435 km
Time Indication: 0
Date: 2125.14.04
Time: 03:10:59

01542 - Yaw Rate Sensor (G202)
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100100
Fault Priority: 3
Fault Frequency: 1
Reset counter: 38
Mileage: 136435 km
Time Indication: 0
Date: 2125.14.04
Time: 03:10:59
Post Reply