Oil Pressure warning after replacing injector loom/De-EGR

[Snookiwooki]

Afternoon all,

Last weekend I changed the injector loom on my AVF and de-EGR'd it with an Allard Pro module plus a new rocker gasket just to be sure.

Everything went well, except now if I blip the throttle a few times I get the "STOP" and oil can warning. No error at idle even after 10 mins plus and not worrying noises from the engine.

Could just be my imagination but I am not sure the revs drop back to idle as quickly as had previously...

Any tips on where to start looking for a resolution? would any loose vacuum hoses cause this as didn't disconnect anything oil related.

many thanks
Steve