got some spots i want to put a very small on off switch somewhere around the dash but cant find any where to route a cable to the engine compartment or somewhere to drill a 12mm hole for the switch anyone done this or any ideas
Thanks so much in advance if you can help
fitting a on off switch in dash
Moderators: water01, vwnutant, desertstorm
-
- B1
- Posts: 99
- Joined: Mon Aug 05, 2013 4:28 pm
- Passat model: b5.5
- Location: Malvern Worcester
- Contact:
fitting a on off switch in dash
Passat TDI Highline 2005