hi,
had a weird one just pop up, couldnt scan, controller wouldnt communicated on k1, i get green light when ignition is off, then it flickers red when ignition on
anyway.. narrowed it down to the k-line connection to the 452 relay, cut it off and i can communicate as normal.
strange thing is, the k line wire is fully cisible from 452 to the diag wire on the OBD potrt and its not touching a thing, not sure why, on ignition the relay is grounding the k line connection.. something wired wrong or is that a fault with the relay?
is there any way that the relay could even possibly connect pin10 ground on 452relay to pin6 to cause this short?
cheers
SORTED - Relay 452 for MFSW - pin6 (k-line) shorting
Moderators: water01, vwnutant, desertstorm
- rodnay
- Too much time on your hands
- Posts: 1583
- Joined: Tue Apr 26, 2011 2:35 pm
- Passat model: B5.5 1.9TDI AVF
- Location: Walsall
SORTED - Relay 452 for MFSW - pin6 (k-line) shorting
Last edited by rodnay on Sat Nov 11, 2017 7:15 am, edited 1 time in total.
Key Programming | VCDS | Dimsport - MAPS BY SLT | Key Cutting
Need an SKC PIN? can pull most SKC's off most VAG vehicles up to 2017
WALSALL BASED