B4 vr6 hesitation any help ? Problem solved

From 16v to vr6- Add all the information in here....

Moderators: water01, vwnutant, desertstorm

Post Reply
User avatar
lee1
UKPassat's Possie
Posts: 9534
Joined: Fri Feb 29, 2008 8:27 pm
Passat model: B4 wagen VR6
Location: West yorkshire

B4 vr6 hesitation any help ? Problem solved

Post by lee1 »

This is driving me nuts. So any help would be great as could be one or all of a select things.

Would a faulty coil pack course hesitation past 2k rpm also if the revs are held after 2k it's still hesitates.
But will accelerate find once past the hesitation. It does it hot or cold and idles fine at 800 rpm.
As it drive fine upto then.
Even though it has a 2.9 throttle body and air intake on a 2.8 obd1.
I've only had the car a week and bought as a none runner only needing heater matrix fitting.
It's had
New rad
All new silicone hoses
Both new cts
New aux water pump
New Bremi coil pack and leads
Pcv delete replaced with catch can
Knock sensor
New header tank
New thermostat
New oil pressure switches
Air intake sensor
New heater matrix.

With the symptoms I don't think it's the throttle body.
Had it scanned last week and no fault codes other than front left abs sensor.

Need help as not enjoying this hesitation.

Thanks.
Last edited by lee1 on Fri Feb 13, 2015 8:51 pm, edited 1 time in total.
B4 wagon VR6

Image

This topic has 25 replies

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply