Andys 5.5 PD 130 TDI Sport

The virtual show-'n'-shine - show us what you've got, plus some details about it! Feel free to add a pic of yourself so we can put a face to a name!

Moderators: water01, vwnutant, desertstorm

Post Reply
andy7671
B1
Posts: 78
Joined: Tue Jun 05, 2018 7:45 pm
Passat model: PD 130 sport
Location: Holsworthy.

Andys 5.5 PD 130 TDI Sport

Post by andy7671 »

So...to do

Passenger window regulator rear....that went ok this morning
Drivers front window regulator...banjaxed right at the end, grrrr..
Whining FRK gearbox
ESP not working, ABS unit (the plastic bit on the side...?
Boot hinge
Drivers seat squab.
Check camshaft

So the regulator, guess theres two or more internal galv panels, the door handle, where the window switches are, the original had three bronze coloured screws, the replacement has only one, in a different position, hoping its just a different plastic unit I need, anyway pictures paint a 1000 words ,
Image

In the above you can see the galv sheet where a helicoil should be, behind the bronze collet middle slightly left.
Image

Red cross shows where thread is on the one I've installed, so hoping theres another plastic bracket wth one fixing that I can fit, save taking it all apart again.

But hey, think I found the cause of the rough runningImage

Right lets see the state of EGR and camshaft

This topic has 1 reply

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply