this is a little guide i knocked up today while swapping my wings
hear are all the bolts u need to un-do:
remove mud flap and undo this bolt:
then u have these 2 under the plastic skirt:
good time to clean out the poo too
then open the door and u have one hear:
dont need to undo this one all the way just slack it off enough for it now to grip the wing
then u need to undo this bolt to get to the last hidden bolt its what i assume to be a dust cover behind the wheel arch right by the indicator :
once cover removed u see this:
dont need to undo this one all the way just slack it off enough for it now to grip the wing
then u have the 4 under the bonnet:
u will need to either lift up or remove the scuttle cover for this
then finally the last few bolts:
removed the plastic guide that the bumper ends go into:
then under it there is 2 more bolts :
and then its a case of slowly pull and remove the wing being careful not to scratch ur door
fitting is the same this order is not the way u can do it its just the way i did it
hope this helps people out
how to remove a wing on a b5.5
Moderators: water01, vwnutant, desertstorm