Brake servo and Master Cylinder Change 2002

This Section is purely for HOW TO step by step guides , if you want to submit a thread please email admin or post it up and we will moderate it accordingly....these can be discussed in the other relevant forums . ALL THREADS WILL BE LOCKED

Moderators: vwnutant, desertstorm, water01

Post Reply
dave_1
UKPassat's Possie
Posts: 5554
Joined: Mon Aug 11, 2008 6:59 pm
Passat model: B5.5 Tdi 130Bhp
Location: Hailsham ,East Sussex

Brake servo and Master Cylinder Change 2002

Post by dave_1 » Mon Jan 26, 2009 6:28 pm

Hi Guys
Just done a servo and M/c change.

Cover removed
Image

Inside
Image

Lower panel removed

Image

Image

Pedal box
Image

Wipers removed you need a puller to get them off and then remove the lower trim.
Image

Suck the brake fluid out.
Image

Remove the bolt that hold the take the res tank off
Image

Unbolt the servo and M/c i undid the connection from the pedal without removing the fitting from the clip you can see the drain blocked!
Image

Water damage to servo.
Image

Water damage to M/c
Image

New servo and M/c fitted
Image

Refit all trim parts and wipers etc before a complete brake and clutch bleed
Image

Inside all back together.
Image


Dave
Last edited by dave_1 on Mon Jan 26, 2009 11:45 pm, edited 1 time in total.
vag-Tacho 2.5 ,Vag-com , Sykes pickavant ACR4 , Elsawin ,ETKA, Key coding ,Servicing, Repairs,Autodata,Vivid,Damage free car opening in east sussex

This topic has 16 replies

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests