CHANGE B3 HEATER MATRIX

This Section is purely for HOW TO step by step guides , if you want to submit a thread please email admin or post it up and we will moderate it accordingly....these can be discussed in the other relevant forums . ALL THREADS WILL BE LOCKED

Moderators: water01, vwnutant, desertstorm

Post Reply
veedubjunky
B7
Posts: 1499
Joined: Sun Jul 15, 2007 10:59 am
Location: SUNNY WAKEFIELD

CHANGE B3 HEATER MATRIX

Post by veedubjunky »

As titled but should aslo work for B4 in air con models. Right here goes

give yourself a full day on this it aint a quick fix!

Firstly disconnect battery(safety first) next file your under the bonnet disconnect the two pipes running through the bulk head left of the coilpack
Image

right inside the cab we go you need to basically remove everything from the dash. steering wheel, clocks, stereo, centre console, glove box, driver and passenger lower try's etc til it looks somethin like this

Image
Image

*note be very gentle when removing the heater vent if they dont come out easy you havent removed all the screws

once youve removed all the bolt on bits its time to unbolt the dash which in held in by 6 bolt, 2 on either end and 2 in the centre behind the centre console
Image

now gentley give the desh a tug and lift and the sametime it should now be loose but not free just yet behind the stereo and heater controls is a large black plastic box about the size of a cerial packet held in by 1 screw at the bottom and 2 clips, one either side you should then be able to remove this
ok back into the engine bay and unbolt the 2 nuts holdin the heater matrix to the bolk head
Image


now we are getting somewhere
Image

This topic has 1 reply

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply