UKPassats

Not .c1b , its .clb - label files present for the module . Also do not forget gen4 and any other modules can have different hw and sw versions flashed. ;) Done all many times mate. Dont forget and read what i said before. My passat is b6 not b7 , and i have installed all b7 door modules , plus ccm ,...

I have gen4 max and any of the coding doesnt work. Not through long coding and not changing adaptation channel values. Will have to try eeprom values changed. But not sure if its gonna work on 3aa modules.

jaraz

They can be power fold with remote. ;)but it depends on parts and coding. I have done retrofit of all b7 door modules ( front and rear ) and b7 mirrors on 55 plate passat ;) But power fold will only work with remote if doors modules are installed as on lhd car and adaptation channel values changed. ...

As Seb said , mk6 and mk7 wheels work only with lin2 steering modules.

jaraz

Advise on 4motion exhaust. Only on 4motion and r36 spare wheel well is centered in the middle , on tdi there is less space on the righ. So silencer will not fit to the right. Unless they changed something in b7.


jaraz

J519 cecm on b6 and bcm on b7 doesnt have any immo details , its a power unit , which powering up all vehicle units. So if cecm was faulty , swap for donnor and re code should sort the issue. Wrongly coded ?!full scan ?

jaraz

Sign assist only with extra camera. Which installed next to rain light sensor. And which ( i can bet ) you dont have.

jaraz

battery disconnection will cause only esp and steering angle sensor errors , which will disappear after few hundred yards of driving .
Airbag , most likely appeared with low battery , and you will need vcds to clear it .

this is anti dazzle moirror ( auto dimming) , mirror has two sensors - front and rear , which work in tandem . Auto lights and rain sensor attached to the windscreen behind the mirror mount . this is not for switching the headlights , for road sign recognition and light assist you need front camera...

this is anti dazzle moirror ( auto dimming) , mirror has two sensors - front and rear , which work in tandem . Auto lights and rain sensor attached to the windscreen behind the mirror mount . this is not for switching the headlights , for road sign recognition and light assist you need front camera .

Few pics from VW Leeds Festival 2016 : http://i1115.photobucket.com/albums/k560/ZinaVW/My%20build%20thread%20photos/Exterior/20160812_195317_zpsqj76c4ge.jpg Double decker bar :) http://i1115.photobucket.com/albums/k560/ZinaVW/My%20build%20thread%20photos/Exterior/20160812_204344_zpsbahkijyh.jpg http...

How do you know b7 dont have this ? Lol b6 only started having it after around 5-7 years from new. So you have the answer.

jaraz

Yes the trims under wiper arms.
Part numbers : 3C2 819 404 B 9B9
3C2 819 403 9B9

Price around £30 each from vw.
Or 29.45 eur each in Germany.

jaraz

With lights on

jaraz

This is how Chris's lights look like . Pictures were taken while i was doing skyline for him.

jaraz

You dont need to take lenses off. Jyst spray over them.

jaraz

Chris from forum have done over spray with red paint. It doesnt look bad .
But as said above it will affect reverse light and amber indication.

jaraz

On etka i can only find this. And they have different part numbers . Price £38 each .

New windscreen with rain sensor installed in Essen, Germany. http://i1115.photobucket.com/albums/k560/ZinaVW/My%20build%20thread%20photos/Exterior/received_10153526678741741_zps5v72tbet.jpeg Rain sensor and auto dimming mirror installed. I already had all wiring installed for rain and light sensors....

New scuttle panel trims picked from VW Aachen , Germany
Preparations to replace windscreen and at the same time install new trims instead cracked ones.


jaraz

Ukpassats club stand at GTI International 2016 http://i1115.photobucket.com/albums/k560/ZinaVW/My%20build%20thread%20photos/Exterior/IMG_4132966298653_zpslawvmlxy.jpeg http://i1115.photobucket.com/albums/k560/ZinaVW/My%20build%20thread%20photos/Exterior/IMG_40406729104957_zpssn2co2gv_edit_1469717142...

stylin wrote:Looking good matey
Can't wait to see it with the new wheels because I think the current ones are a little old school for your more modern car (just my opinion....not necessarily the law )
Still doesn't stop me from liking it!

Thanks a lot mate.

jaraz

Mirrors from cc will not fit into b7 or b6.
100% , but if someone in doubts ,get them and get back to me

Modules , switch will fit , but nit mirror itself.
B6 and b7 have 3 bolts and one tab .
Cc has less bolts and tab is in different location.

jaraz

Yes it will fit. Airbag plugs are might be different , but you can always take old ones from your current seats.

jaraz