cheers good idea about using a wire to cut them off.
Oh and Martyn got your message about the keys will get them to you asap.
Search found 2163 matches
- Wed Feb 05, 2014 9:59 pm
- Forum: B3 & B4 PASSATS
- Topic: Removing B-pillar covers
- Replies: 4
- Views: 1328
- Wed Feb 05, 2014 11:11 am
- Forum: B3 & B4 PASSATS
- Topic: Removing B-pillar covers
- Replies: 4
- Views: 1328
Removing B-pillar covers
Has anyone had any success removing the trim covers on the B-pillar without wrecking them? Mine were removed a few years back when it was painted but got rather bent in the process as it turns out they are glued on as well as the pop rivet at the bottom. I have the chance to remove a pair from a car...
- Mon Feb 03, 2014 9:40 pm
- Forum: B3 & B4 PASSATS
- Topic: Front and rear calipers on b3 gt
- Replies: 1
- Views: 860
Re: Front and rear calipers on b3 gt
yep same as mk2 golf 16v gti
- Sun Feb 02, 2014 7:47 pm
- Forum: B3 & B4 PASSATS
- Topic: Full culls b3/b4
- Replies: 10
- Views: 1825
Re: Full culls b3/b4
We ended up fabricating some sections when we did mine. Lots of cardboard templates!
Hadrian used to make them but I think they went out of business?
Hadrian used to make them but I think they went out of business?
- Fri Jan 31, 2014 6:35 am
- Forum: B3 & B4 PASSATS
- Topic: Got ready to take car for MOT and it would not start!
- Replies: 22
- Views: 3369
Re: Got ready to take car for MOT and it would not start!
The relay for the starter is effectively the solenoid on top of the starter motor, it energises the starter at the same time as throwing the pinion across. I don't think there's a relay in the fusebox for the starter. I'll dig out my Haynes later it has the wiring diagrams in. Didn't realise yours w...
- Thu Jan 30, 2014 9:16 pm
- Forum: B3 & B4 PASSATS
- Topic: Got ready to take car for MOT and it would not start!
- Replies: 22
- Views: 3369
Re: Got ready to take car for MOT and it would not start!
My first thought is ignition switch.
- Thu Jan 30, 2014 4:16 pm
- Forum: CAR RELATED CHAT
- Topic: Pressed plates legal?
- Replies: 30
- Views: 3546
Re: Pressed plates legal?
I think the postcode thing is only if the plates were made after a certain date- around 2007? On an old car, that's going to be pretty hard to prove.
- Thu Jan 30, 2014 12:34 pm
- Forum: CAR RELATED CHAT
- Topic: Pressed plates legal?
- Replies: 30
- Views: 3546
Re: Pressed plates legal?
I've had them on the wagon for the last 5-6 years, but with normal UK font. Have had police cars right behind me, never been pulled over. It's the ones with the german font that they get funny about.
- Thu Jan 30, 2014 12:14 pm
- Forum: MEMBERS MOTORS AND MUGSHOTS
- Topic: B3 wagon
- Replies: 56
- Views: 1850
Re: B3 wagon
Love the wheels, really got a thing for multispoke/cross spoke alloys on these. Wish someone made a wheel similar to a BBS RA but in 16" and 5x100.
There were some cool wheels with a similar design on Porsche 924 turbo's but when I looked I think the offsets were too low.
There were some cool wheels with a similar design on Porsche 924 turbo's but when I looked I think the offsets were too low.
- Thu Jan 30, 2014 8:34 am
- Forum: B3 & B4 PASSATS
- Topic: Mk3 golf glove box in b4?
- Replies: 6
- Views: 1319
Re: Mk3 golf glove box in b4?
I have grey b3 glovebox spare if it's any use?
- Tue Jan 28, 2014 8:07 am
- Forum: B3 & B4 PASSATS
- Topic: B3&mk3 golf repeaters the same?
- Replies: 3
- Views: 919
Re: B3&mk3 golf repeaters the same?
Yep the rectangular ones are the same size but you need the bulb holders as well as the B3 just has spade connectors on the end of the loom rather than a plug.
- Mon Jan 27, 2014 9:33 pm
- Forum: MEMBERS MOTORS AND MUGSHOTS
- Topic: The B4
- Replies: 17
- Views: 562
- Mon Jan 27, 2014 10:36 am
- Forum: B3 & B4 PASSATS
- Topic: b3 2.0 tuning?
- Replies: 6
- Views: 2007
Re: b3 2.0 tuning?
I reckon most would take it out and fit something with a naturally higher power. Saying that, start by making sure everything's set up as well as it can possibly be... We have a 2e in the corrado. A mate bought one with an ABF conversion which he reckoned wasn't as quick as our 8V. The 2e and ABF u...
- Sun Jan 26, 2014 7:05 pm
- Forum: B3 & B4 PASSATS
- Topic: Diesel Decat Pipe
- Replies: 9
- Views: 1838
Re: Diesel Decat Pipe
hehe I think a 300+bhp tuned turbo engine needs to flow a bit more air than a little turbo diesel!
- Sun Jan 26, 2014 6:47 pm
- Forum: B3 & B4 PASSATS
- Topic: Diesel Decat Pipe
- Replies: 9
- Views: 1838
Re: Diesel Decat Pipe
Back pressure will be provided by the turbo- on a turboed car you want the least restrictive exhaust possible to reduce turbo lag- that's why you see imprezas etc. with great big exhausts on. You want the biggest pressure difference possible upstream and downstream of the turbo.
- Thu Jan 23, 2014 9:39 am
- Forum: B3 & B4 PASSATS
- Topic: b4 tdi into my b3 estate
- Replies: 12
- Views: 1822
Re: b4 tdi into my b3 estate
I'd use the tdi clocks as the rev counter will have the red line in the wrong place otherwise. Also depends on the speedo drive on the new gearbox- electronic or mechanical. You could probably mix and match the insides if the VR6 clocks have more bits on like the MFA but depends how technical you wa...
- Wed Jan 22, 2014 9:18 pm
- Forum: B3 & B4 PASSATS
- Topic: b4 tdi into my b3 estate
- Replies: 12
- Views: 1822
Re: b4 tdi into my b3 estate
Sorry didn't realise the b4 was a saloon- Adam is correct the tanks won't swap, there's an extra 20 litres in a wagon tank :-) I don't think there's any difference between petrol and diesel tanks, just the round hatch bit that goes in the top of the tank is different, that bit should swap over but t...
- Wed Jan 22, 2014 8:26 pm
- Forum: B3 & B4 PASSATS
- Topic: b4 tdi into my b3 estate
- Replies: 12
- Views: 1822
Re: b4 tdi into my b3 estate
Swap as much of it as you can, it's easier in the long run. When I did mine (2.0 16v ABF from a b4 into a b3), I even swapped the dash loom, clocks etc. the plugs are all the same but a few nice little features like electronic speedo rather than mechanical, more wires in the stereo loom and other st...
- Wed Jan 22, 2014 12:22 pm
- Forum: CAR RELATED CHAT
- Topic: If you were to sell...
- Replies: 10
- Views: 1438
Re: If you were to sell...
Getting an E39 alpina B10 3.3 this summer as next car
Although I'm keeping the B3. Can't face ever selling that.
Although I'm keeping the B3. Can't face ever selling that.
- Wed Jan 22, 2014 12:20 pm
- Forum: B3 & B4 PASSATS
- Topic: How to remove GT sill covers
- Replies: 4
- Views: 890
Re: How to remove GT sill covers
There are plastic nuts underneath that go on to studs welded to the sills (this is there the rot starts). Undo these, then you have to sort of push them upwards and outwards to unclip the top edge. I think there might be a rivet or screw inside the wheelarches at the front and back to take out too. ...
- Tue Jan 21, 2014 8:24 am
- Forum: B3 & B4 PASSATS
- Topic: ignition switch replacement
- Replies: 13
- Views: 2320
Re: ignition switch replacement
My suggestions: - fuel pump - coilpack (especially if it's one of the cube shaped ones) AFAIK the only sensors that will stop one of these running if the signal is lost are the crank position sensor and coolant temperature sender, the rest are just for optimising the AFR and timing, so the engine wi...
- Mon Jan 20, 2014 9:47 am
- Forum: GENERAL CHAT
- Topic: Ch 4 Don't look down.
- Replies: 7
- Views: 1487
Re: Ch 4 Don't look down.
Watched some of this, had to turn it off, was making me feel sick. The guy came across as a bit of a selfish idiot tbh. He didn't seem to care about how his death would affect his mum, who was obviously very scared for his safety, and couldn't really justify why he was doing that stuff.
- Sat Jan 18, 2014 7:58 pm
- Forum: B3 & B4 PASSATS
- Topic: ignition switch replacement
- Replies: 13
- Views: 2320
Re: ignition switch replacement
there is a splined collar behind the steering wheel which wouldn't budge so had to pull out the steering column shaft to change the starter switch, bitch of a job! :shock: They come off easy with a bearing puller :???: Rich Yeh pretty easy, done a few of these. Put a pair of stilsons round the coll...
- Sat Jan 18, 2014 5:28 pm
- Forum: B3 & B4 PASSATS
- Topic: b4 splitter
- Replies: 4
- Views: 1594
Re: b4 splitter
Mk1 seat Toledo looks good. Not a direct fit but works better than the mk3 golf vr6 one that others have used.
- Thu Jan 16, 2014 6:13 am
- Forum: B3 & B4 PASSATS
- Topic: b4 pcd????
- Replies: 10
- Views: 1386
Re: b4 pcd????
Apart from the b4 2.0 16v and very late b4 tdi's