UKPassats

Does anybody have a full pin-out list for the Siemens PPD1.5 ECU please ? I already know +12v and ground, but I need to find out which pins carry the 5v reference voltage. I know it's on T60 pin 42, but I suspect it is also on at least one other pin on either the T60 or T90. This is for a 2007 140HP...

I think I've just about got there - no thanks to Kufatec. It turns out that their "manual" is translated into English by a software program. After a couple of e-mail exchanges, they finally got around to communicating in English that I can just about understand. The last stumbling block is...

I am trying to install a radio from a 2009 Passat into a 2008 car. Unfortunately, the aerial connections are not the same. As you can see from the pics, the 2008 car has two separate leads, but the 2009 combines the leads into a single block. Apart from chopping the wires and bodging a connection, d...

It's black. I have just bought a retrofit cable harness from Kufatec and am dismayed to discover that the "manual" for installation is hopeless. It's a sloppy translation from German into English - which means that some parts are unclear. It is limited to pin connections, power supply conn...

I have just bought a 2007 PD Estate with basic cloth seats. I already have a dead 2008 common rail Passat estate with leather heated seats but a wrecked engine. The plan is to break the 2008 car and to move the leather seats across to the 2007 car. I know that the seats will physically fit, but what...

Are you sure the source of the wobble is the driveshaft ? I looked at mine recently, having changed a wheel bearing, and thought it was running with a visible wobble. The visual effect was caused by the CV rubber boots and clips not being symmetrical. If you can feel an vibration through the brake p...

This 2L engine has become difficult to start. Even when it does eventually start after lots of cranking, it only just runs and often cuts out. When the engine does run, there is no response from the throttle for 15-20 seconds. When there is finally a response, the revs increase slowly to about 1600r...