UKPassats

Hi folks

My car has a fault where passenger side will only blow cold air even when set to Hi. Drivers side seems ok. I checked temperature reading in passenger vent but is accurate. I’ve reset clima by holding ac and front facing vent button. No effect

Any help is highly appreciated

Thanks

Hi guys I finally got this working after 6 months of ownership. I’ve not changed and parts just coding and ensured window remote operation was enabled via key

For £50 you can get obdeleven pro and enable it yourself along with a bunch of other things

I think when it says left side dash it’s actuslly right as That website is LH drive description I think

I found the same on my estate, when reversing up drive and looking in mirrors it isn’t well illuminated compared to my old 2006 civic. Also country lanes without high beam, HID didn’t seem to light up a great distance ahead of me. To answer coming home... you need to flick the high beam switch to ac...

Has anybody had the engine software reversed to pre emissions fix? Wondering if people have noticed any difference. I’ve only driven the car after update so can’t judge but I’ve read lower rpm torque is higher and generally feels a better drive. I’m used to driving a van and Passat feels lazy at low...

All fixed, was a broken pin on the module that is stuck in the plug... jammed a staple cut to size and all works well

It doesn’t appear on installed list and when I manually add it says not responding wether plugged in or not. Cant get a scan as it constantly freezes on trailer function module

Don’t fancy buying another to find module isn’t at fault

Yes exactly the same

chillout1983 wrote: ↑Sun Nov 03, 2019 8:59 pm A scan would show your coding

I’ll see what I can do with obdeleven

If you could show your coding I could probably be able to suggest coding for your camera it would need to be coded on the Gateway to be visable initially. Yes cleaning seems to have fixed it.. I did a lengthy drive yesterday and autumn road mist lead me to clean rear window frequently.. obviously f...

Does it come up with its own individual module also? 6C I believe ?

Sorry just trying to find where I’m going wrong

Was it plug and play I.e module popped up on vcds without any other coding ?

Did you sort?

I can vouch for this alarm issue. Its blue connector block behind boot lining getting wet from screen wash. All dried and fixed just need to sort the leak

Winner winner chicken dinner!

Ok, so after alarm issues and having to strip right hand side of boot to diagnose o have washer fluid leak I discovered I do have parking module. In all fairness it’s in very good condition except plug contacts showed slight signs of water contact. I have cleaned with contact cleaner but still no go...

Also boot doesn’t close with fob (gutted) or tow bar release anymore

Must have been some serious shorting of wires lol

Connector block seems ok for now, must remember to not use rear screen wash.

As for reverse camera module. Seemed ok inside. Contacts look a little green on a few but cleaned up with contact cleanser and toothbrush but car is still not recognising it. I’m presuming it’s dead

Legend. Big blue connector block is what’s hissing and goes to boot lock and one connector is blackened, camera module also shows signs of rot on connector but appears fine inside. I will try and dry block and fix if possible

I’ve stripped and discovered camera module and what smells like screen wash... any hints where it’s leaking

I’m trying to strip right hand side as I can hear a slight hissing sound like electrical?

So early hours alarm on the car kept repeatedly going off. I’ve put it down to tailgate as the cluster screen was flickering the tailgate as open and closed intermittently. I randomly decided to release the factory fitted towbar which made the boot close nearly crushing me! Another random thing boot...

Looking for advice on removing right hand side boot liner to expose where Reverse camera module should be installed.

Been bugging me for months trying to diagnose my reverse camera so need to check if it has one installed or not