UKPassats

Any on her clued up on paint codes I have a 04 wagon code (LC9Z black magic) and an 04 Ibiza FR both the PD130 engine and both with the same paint code, however side by side they are clearly different shades, is there any variants with this paint code and if so any way to tell which is which, body w...

yeah thought that might be the case as I did mine also when I did the cambelt let's hope they don't just pack in

You legend yeah goes away with econ engaged, I can live with that for the time being pleased its not anything serious

Cheers pal

No I can't seem to, really starting to bug me, not mentioned earlier, it's a 130 AWX engine, and it's is driving fine, still pulling well no other symptoms apart from the noise.

Hi recently noticed (Last few months) a strange chirping/ticking noise coming from the engine bay, did some research and have tried the most common answers, I have ran engine with aux belt removed noise still present, tried applying a small abound of bees wax to the cambelt via upper inspection pann...

I have the above decat listed in the eBay link, been through two MOT's with no issues at all mechanic actually said it had a very good emmisions result.

I did have to buy another section of pipe to attatch to is as my cat was fixed to the centre section of exhaust, check to see if yours is fixed.

Hi I realise this is a different car to what usually post about however i thought as it has the same engine you lot may be able to help. So two days ago i started my car to go to work and it lit up like a Christmas tree, power steering light, yellow abs light, TCS light, Red handbrake light, and EML...

Yeah i did this on my old 1.8t tt quattrro but not sure if it is the same process for a tdi thats all ?

Yeah i did this on my old 1.8t tt quattrro but not sure if it is the same process for a tdi thats all ?

does anyone know how to do a boost leak test on a 1.9tdi, can find much info on this being done, I have a compressor and was going to make a boost leak tester but not sure if it is the same process as a 1.8t.

Cheers

Thank you so much for the info mean allot

Anyone know the specific sizes for all of the seals for the pipes on the turbo system ?? Want to replace them all but on searching I think there are three different sizes but not sure how many of each size I need

Thought someone might already know which will save me hours of research

I will be in the garage soon and will measure mine thank you for the offer though I will order some new seals and give it a go.

Both ends of the lower IC pipe were dirty with oil the hose was fine and the flared parts of the pipe were fine, you think i will get away with new green seals instead of purchasing a whole new pipe ??

also anyone got any idea on intake diameter ??

I did stick a rag inside the inter cooler to see how much oil had accumulated in the lowest point cleaned it out must have only been around 10ml in there, I will see about getting a new lower IC pipe then as both sides of it are coated in crud, and do have some play while the metal retaining clip is...

Been a while since i logged in nice to see others with similar problems, i did notice that my lower IC pipes were coated in cruddy oil, does this mean I will have an air leak in these locations as i have checked all of the pipe work attached to the turbo system and there is no splits, my whistle noi...

Hi need some help my turbo oil feed is leaking, looks like it is co ing out of the adapted that screws in to the turbo its self, it has a copper washer. I'm looking for a new adapter and washer but not sure which one I need a new washer woukd do I guess but can't seem to find a specific one. All the...

Found it thanks for the comments was located behind the front bumper on the left side if you are looking at the front of the car, bumper has to come off

hi i have a defective ac pressure switch, have the new one hear but for the life of me I can't find where it goes, any one have any idea where this is located, its on a friend's car he has the 1.9tdi auto think it is the pd100 or 110 not sure Any help would be much appreciated i had a look on my els...

Defo going to do it just looking for the right kit/harness company called kufatec supply kits that require no cutting or splicing wires £50 express shipping from Germany Think its worth the purchase just scared I end up with the wrong kit am I right in thinking if it says passat 3bg it will fit my w...

Canceled the order now just to be safe, some others seem to have a second connector on the loom hoping someone on hear can help me out with a link to somenthing the have used

Just bought a cruise control kit of amazon, and iv now noticed that in the description right at the bottom it says not sutible for England ??

The harness and the stalk looks exactly the same as the genuine vw one ? Harness is even the same length any ideas ?

Sorted it I haven't putted the vac line to the top of the egr valve

Cleared the code and job done ✔

Will have a look their is two vac lines in egr but 99% sure I put them back on but you never know I suppse

so i had my wagon in bits yesterday trying to locate a loose boost/intercooler pipe anyways while I was in there I cleaned the intake manifold and egr. Now all back together I have emmisions workshop light on ?? Do I need to reset the egr? Any ideas on what could have caused this to happen ?? I had ...