Search found 46 matches

by jasst
Fri Feb 14, 2020 1:49 pm
Forum: B6/CC PASSATS
Topic: Help clutch problems
Replies: 2
Views: 741

Re: Help clutch problems

Very good guide here which I used as a basis for doing mine https://www.youtube.com/watch?v=uIlKyu-diL0&t=3803s
by jasst
Wed Jan 01, 2020 8:22 pm
Forum: B6/CC PASSATS
Topic: sensitive throttle
Replies: 3
Views: 745

Re: sensitive throttle

Did some research and found a 'how to' on the Ross tech wiki, which seems to have worked, #:-S
by jasst
Sat Dec 28, 2019 9:56 pm
Forum: B6/CC PASSATS
Topic: sensitive throttle
Replies: 3
Views: 745

Re: sensitive throttle

Any idea how you go about doing that? I wondered if it might be something like that as battery was disconnected for about a month while i did the clutch.
by jasst
Sat Dec 28, 2019 9:16 pm
Forum: B6/CC PASSATS
Topic: sensitive throttle
Replies: 3
Views: 745

sensitive throttle

My 2006 2.0 fsi 200 has developed a very sensitive throttle, in that you only have to move it a little bit to obtain full revs, makes trying to drive smoothly a bit of a challenge, fuel consumption is the same as before, and no warning lights showing, This has happened since I changed the clutch and...
by jasst
Wed Oct 30, 2019 8:38 pm
Forum: B6/CC PASSATS
Topic: bolt torque
Replies: 2
Views: 787

bolt torque

Busy doing my clutch, and seems that most bolts need to be torqued to a certain figure + 90 or whatever degrees, does this apply to re used bolts or just new ones? are they stretch bolts? seems a f****** stupid idea, why not just give a higher torque figure?
by jasst
Mon Oct 21, 2019 8:47 pm
Forum: B6/CC PASSATS
Topic: SINGLE MASS FLYWHEEL KIT
Replies: 10
Views: 2356

Re: SINGLE MASS FLYWHEEL KIT

After a DMF and clutch kit with csc
by jasst
Sun Oct 20, 2019 7:25 pm
Forum: B6/CC PASSATS
Topic: SINGLE MASS FLYWHEEL KIT
Replies: 10
Views: 2356

Re: SINGLE MASS FLYWHEEL KIT

Sorry, bit of a misunderstanding, not considering single mass flywheel, just want to know if 'techniclutch' is a safe place to buy from?
by jasst
Sat Oct 19, 2019 7:29 pm
Forum: B6/CC PASSATS
Topic: SINGLE MASS FLYWHEEL KIT
Replies: 10
Views: 2356

Re: SINGLE MASS FLYWHEEL KIT

Is there something wrong with 'techniclutch'? shopping around for one for mine and they are considerably cheaper than anyone else for a branded product(LUK)
by jasst
Sun Oct 13, 2019 6:17 pm
Forum: B6/CC PASSATS
Topic: Help, clutch gone?
Replies: 5
Views: 1063

Re: Help, clutch gone?

Its a 2006 B6 2.0 sel 200bhp
by jasst
Sun Oct 13, 2019 4:21 pm
Forum: B6/CC PASSATS
Topic: Help, clutch gone?
Replies: 5
Views: 1063

Help, clutch gone?

Help, I think my clutch has gone, I drove to my other half's this morning, all was fine, parked car and went out in hers, came back and got in mine to come home and it wont go into gear, if i stop engine and put into gear then start engine with foot on the clutch it lurches forward and pressing the ...
by jasst
Fri Sep 06, 2019 5:38 pm
Forum: B6/CC PASSATS
Topic: Rough idle
Replies: 2
Views: 1147

Re: Rough idle

Pcv totally shot, fitted new one and normal power is resumed.
by jasst
Fri Jul 19, 2019 6:58 am
Forum: B6/CC PASSATS
Topic: Rough idle
Replies: 2
Views: 1147

Rough idle

Took the car out today, (2.0 fsi) and the idle was as rough as hell, really hunting, under power seemed like normal, and drives ok, Good old Google suggests it may be the PCV valve ? did what was suggested and put finger over small hole on valve, and could feel suction which apparently I should not ...
by jasst
Tue Jul 02, 2019 6:00 pm
Forum: B6/CC PASSATS
Topic: still overheating
Replies: 9
Views: 1438

Re: still overheating

Interestingly I was looking at the handbook for an entirely unrelated reason and I read the page regarding the gauges, apparently the normal operating range is up to 120degC, and the warning light will not come on till that temp is exceeded, so I may have been panicking for nothing! still seems to b...
by jasst
Thu Jun 20, 2019 4:39 pm
Forum: B6/CC PASSATS
Topic: still overheating
Replies: 9
Views: 1438

Re: still overheating

VCDS shows no faults on cooling system, thermostat come pre assembled in the housing so impossible to put in wrong way. Original problem was car taking ages to get to normal operating temp, and sometimes not getting there at all, certainly cured that problem!
by jasst
Sun Jun 16, 2019 4:11 pm
Forum: B6/CC PASSATS
Topic: still overheating
Replies: 9
Views: 1438

Re: still overheating

Not when overheating, but I have seen it working, but didn't seem to be any reason why it was, a bit hit and miss
by jasst
Sun Jun 16, 2019 8:48 am
Forum: B6/CC PASSATS
Topic: still overheating
Replies: 9
Views: 1438

still overheating

My 2006 2.0fsi est was overheating when stuck in traffic, I have replaced the water pump, both thermostats and both temp senders, before I did this work it struggled to get to full temp, which it now does, and runs at an indicated 90 degrees until I get stuck in traffic, when it rises to 110 and I h...
by jasst
Thu Jun 06, 2019 5:29 pm
Forum: B6/CC PASSATS
Topic: parking sensors
Replies: 3
Views: 1409

Re: parking sensors

Sorted it anyway, dirty connection on one of the front sensors
by jasst
Mon Jun 03, 2019 7:32 am
Forum: B6/CC PASSATS
Topic: 2007 B6 2.0l FSI SE Saloon 9500 miles
Replies: 12
Views: 1365

Re: 2007 B6 2.0l FSI SE Saloon 9500 miles

It would be useful for people new to the brand, and use of 'autodoc' and the like to have a list of makes of parts that can be trusted, and ones that should be avoided, Anyone?
by jasst
Sun May 12, 2019 6:31 pm
Forum: B6/CC PASSATS
Topic: PDC
Replies: 1
Views: 699

PDC

My 2006 SEL came with factory fit front and rear parking sensors which just emit a tone when in use. I have just fitted an RNS 510 and would like to get the visual display on this when they are working, is this do able? and if so how?
by jasst
Mon Apr 29, 2019 8:35 pm
Forum: B6/CC PASSATS
Topic: Passat B6 comprehensive brake bleed
Replies: 18
Views: 8330

Re: Passat B6 comprehensive brake bleed

Got to do this myself as have seized bolt in bush, is there a step by step guide anywhere?
by jasst
Fri Mar 22, 2019 5:38 pm
Forum: B6/CC PASSATS
Topic: can gateway
Replies: 0
Views: 1059

can gateway

So today I had ago at replacing my can gateway for a later version to avoid the battery discharge issue as I want to fit an RNS 315. Failed miserably, followed guides from you tube , but couldn't get new unit to accept codes , ticked all the boxes in the installation list that were ticked for old un...
by jasst
Sat Dec 08, 2018 9:16 pm
Forum: B6/CC PASSATS
Topic: Thermostat
Replies: 7
Views: 1837

Re: Thermostat

Ok, funny that there is a box with search by vin, but have 'dialled in' my car and come up with this http://www.oemepc.com/vw/part_single/catalog/vw/markt/RDW/modell/PA/year/2006/drive_standart/460/hg_ug/121/subcategory/121030/part_id/3691348/lang/e so is coolant regulator what we would call thermos...
by jasst
Fri Dec 07, 2018 6:38 pm
Forum: B6/CC PASSATS
Topic: Thermostat
Replies: 7
Views: 1837

Re: Thermostat

Well that doesn't work, put in vin and came back with 'no result for your vin no'
by jasst
Thu Dec 06, 2018 7:43 pm
Forum: B6/CC PASSATS
Topic: Thermostat
Replies: 7
Views: 1837

Thermostat

I have a 2006 2.0FSI 147kw version, and have come to the conclusion that the thermostat needs replacing as on a cold day, temp gauge doesn't go above 70, Have looked on several sites such as autodoc (never used before) and loads of different ones are listed, dif temps, dif shapes etc, so how the hel...
by jasst
Sun Oct 14, 2018 9:30 pm
Forum: B6/CC PASSATS
Topic: Very high spec car.
Replies: 7
Views: 2587

Re: Very high spec car.

Wrong fuel, wrong gearbox, and way overpriced despite the spec.