My offside has gone, always a fault when I use, but does release after an engine off/on.
Going to attempt the motor repair http://www.ukpassats.co.uk/phpbb/viewto ... 33&t=65737 tonight before shelling out for anything!
Any updated guidance??
Search found 48 matches
- Fri May 10, 2019 7:54 am
- Forum: B6/CC PASSATS
- Topic: EPB failure
- Replies: 78
- Views: 47711
- Tue Mar 13, 2018 10:58 pm
- Forum: B6/CC PASSATS
- Topic: Testing injectors with VCDS
- Replies: 10
- Views: 4832
- Mon Mar 12, 2018 8:14 am
- Forum: B6/CC PASSATS
- Topic: Testing injectors with VCDS
- Replies: 10
- Views: 4832
Re: Testing injectors with VCDS
https://sites.google.com/site/1810martin/vcds-and-pd-tdi-engine-health-check Thanks, mine's a CR though. I did some measurement blocks (013) Address 01: Engine (03L 906 022 BL) 07:47:56 Group 013: Idle Stabilization (Injection Quantity Deviation) -0.12 mg/str Injection Quantity Deviation Cyl. 1 0.0...
- Sun Mar 11, 2018 8:49 pm
- Forum: B6/CC PASSATS
- Topic: Testing injectors with VCDS
- Replies: 10
- Views: 4832
Testing injectors with VCDS
Hi all,
Has anyone an idiots guide to testing injectors with VCDS? I have irregular white smoke, but already had a new turbo so don't think it's that.
Has anyone an idiots guide to testing injectors with VCDS? I have irregular white smoke, but already had a new turbo so don't think it's that.
- Wed Feb 21, 2018 7:55 am
- Forum: B6/CC PASSATS
- Topic: Intermittent won't start but turns over. 2.0TDi
- Replies: 5
- Views: 1666
Re: Intermittent won't start but turns over. 2.0TDi
I'll just plod on!
- Fri Feb 16, 2018 9:03 pm
- Forum: B6/CC PASSATS
- Topic: Intermittent won't start but turns over. 2.0TDi
- Replies: 5
- Views: 1666
Re: Intermittent won't start but turns over. 2.0TDi
No codes of relevance?? Friday,16,February,2018,20:51:42:47641 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 18.1.0.2 (x64) HEX-V2 CB: 0.4411.4 Data version: 20180122 DS285.1 www.Ross-Tech.com VIN: License Plate: Mileage: 117040km-72725mi Repair Order: --------------...
- Thu Feb 15, 2018 6:53 pm
- Forum: B6/CC PASSATS
- Topic: Intermittent won't start but turns over. 2.0TDi
- Replies: 5
- Views: 1666
Intermittent won't start but turns over. 2.0TDi
Next problem! I have an 09 CBAB 2.o TDi. 72k. Had balance shaft done, and new turbo (Both before failure). Twice in the last (approx) 200 starts, it just turns over freely, with no hint of actually starting. After about 20 seconds of pressing the start, it eventually lumbers up and starts. No error ...
- Mon Jan 08, 2018 8:23 pm
- Forum: B6/CC PASSATS
- Topic: 58 plate CR140, CBAB balance shaft misc parts & torque specs
- Replies: 15
- Views: 3133
- Thu Dec 14, 2017 10:07 am
- Forum: B6/CC PASSATS
- Topic: 58 plate CR140, CBAB balance shaft misc parts & torque specs
- Replies: 15
- Views: 3133
Re: 58 plate CR140, CBAB balance shaft misc parts & torque specs
Apparently 100mm was only CBAB made 2010 on, or so they told me. And they were correct that my 09 was 77mm.
- Sat Dec 09, 2017 1:40 pm
- Forum: B6/CC PASSATS
- Topic: Balance shaft - KMB or ZEDPerformance?
- Replies: 10
- Views: 3268
Re: Balance shaft - KMB or ZEDPerformance?
Had my KMB one put on this morning.For info, here are the new one, and the one that came off mine. Even though it was a precautionary thing, you can see some wear on mine even though it's only done 68k.
- Thu Nov 23, 2017 8:04 am
- Forum: B6/CC PASSATS
- Topic: Estate tailgate button on door?
- Replies: 12
- Views: 3047
Re: Estate tailgate button on door?
I had to change a setting with Carista/VCDS to let the middle fob button/door switch to do anything.
- Fri Nov 03, 2017 8:45 am
- Forum: B6/CC PASSATS
- Topic: Balance shaft - KMB or ZEDPerformance?
- Replies: 10
- Views: 3268
Re: Balance shaft - KMB or ZEDPerformance?
Decision made for me. ZED Performance ones are out of stock for a while!
- Wed Nov 01, 2017 3:07 pm
- Forum: B6/CC PASSATS
- Topic: Balance shaft - KMB or ZEDPerformance?
- Replies: 10
- Views: 3268
Balance shaft - KMB or ZEDPerformance?
I'm going to have my oil pump done as advised by many here, but there seem to be 2 decent options, KMB and ZEDPerformance. Just had new turbo under warranty (dealer used car one) so willing to have a punt! KMB is exchange with remanufacturing, but ZED performance claims to be German imported new par...
- Thu Sep 28, 2017 5:52 pm
- Forum: B6/CC PASSATS
- Topic: Annoying engine noise
- Replies: 34
- Views: 8172
- Thu Sep 28, 2017 2:27 pm
- Forum: B6/CC PASSATS
- Topic: Annoying engine noise
- Replies: 34
- Views: 8172
Re: Annoying engine noise
Car been in at Nissan today, they diagnose Turbo. Just waiting for warranty company to give go ahead and I should get a new one.
- Tue Sep 19, 2017 11:30 am
- Forum: B6/CC PASSATS
- Topic: Annoying engine noise
- Replies: 34
- Views: 8172
Re: Annoying engine noise
Early 2010 same as my cbab has 100mm from standard, i'm on 177k trouble free miles. Just call vw parts and they will confirm 77/100. KMB just want your money in this situation, i can not find ANYONE with the 100mm in the cbab who has had issues. I've just sent an enquiry, with my VIN, To VW parts f...
- Sat Sep 16, 2017 6:14 pm
- Forum: B6/CC PASSATS
- Topic: Annoying engine noise
- Replies: 34
- Views: 8172
Re: Annoying engine noise
Early 2010 same as my cbab has 100mm from standard, i'm on 177k trouble free miles. Just call vw parts and they will confirm 77/100. KMB just want your money in this situation, i can not find ANYONE with the 100mm in the cbab who has had issues. I've just sent an enquiry, with my VIN, To VW parts f...
- Sat Sep 16, 2017 9:11 am
- Forum: B6/CC PASSATS
- Topic: Annoying engine noise
- Replies: 34
- Views: 8172
Re: Annoying engine noise
Early 2010 same as my cbab has 100mm from standard, i'm on 177k trouble free miles. Just call vw parts and they will confirm 77/100. KMB just want your money in this situation, i can not find ANYONE with the 100mm in the cbab who has had issues. Unfortunately mine is an 09, built in 08 so on the cr...
- Fri Sep 15, 2017 5:06 pm
- Forum: B6/CC PASSATS
- Topic: Annoying engine noise
- Replies: 34
- Views: 8172
Re: Annoying engine noise
Lol. Ok well good. Now is also time to get out the warranty documents, then read every line and every word. There will be exclusions in cover for things like wear items, educate yourself for your impending discussion when the garage finds the issue, in case you need to argue about parts and bills a...
- Fri Sep 15, 2017 12:38 pm
- Forum: B6/CC PASSATS
- Topic: Annoying engine noise
- Replies: 34
- Views: 8172
Re: Annoying engine noise
Graham from KMB! From my VIN and age. Kit 10 only from early 2010 onwards.
- Fri Sep 15, 2017 10:44 am
- Forum: B6/CC PASSATS
- Topic: Annoying engine noise
- Replies: 34
- Views: 8172
Re: Annoying engine noise
Dealer (Nissan) service manager listened, drove and had it on ramps last night. No immediate ideas, but the noise is definitely pinpointed and they've booked it in for further investigation under warranty, with courtesy car. He's also aware of the Oil Pump issues, but is fairly confident this isn't ...
- Thu Sep 14, 2017 9:16 am
- Forum: B6/CC PASSATS
- Topic: Annoying engine noise
- Replies: 34
- Views: 8172
- Thu Sep 14, 2017 7:33 am
- Forum: B6/CC PASSATS
- Topic: Annoying engine noise
- Replies: 34
- Views: 8172
Re: Annoying engine noise
I'll try tonight. Unfortunately it's a Nissan Main Dealer, and a Nissan Warranty, so not over confident!
- Wed Sep 13, 2017 9:27 pm
- Forum: B6/CC PASSATS
- Topic: Annoying engine noise
- Replies: 34
- Views: 8172
Re: Annoying engine noise
No oil warnings at all yet.
I thought CBAB was safe from oil key issues?
Done 16k since February in it with no issues besides this noise!
It's in warranty, but how can I approach the garage with these possibilities without any actual faults?
I thought CBAB was safe from oil key issues?
Done 16k since February in it with no issues besides this noise!
It's in warranty, but how can I approach the garage with these possibilities without any actual faults?
- Wed Sep 13, 2017 7:54 pm
- Forum: B6/CC PASSATS
- Topic: Annoying engine noise
- Replies: 34
- Views: 8172