UKPassats

Is the correct number I have one sitting on my desk that I bought because temp was going crazy after a water pump renewal
Turned out it only needed burping so dont need it Cost me $50 AU


My car is an AUS 2011 Highline 125kw with a CFGB engine

I posted a thread on this about a year ago on here with instructions how to do it. Here it is http://www.ukpassats.co.uk/phpbb/viewtopic.php?f=86&t=88254&p=741385#p741385 To further enlighten the module version shows up in VCDS Also the Chinese OBII dongles are useless I bought one absolute ...

Got mine done in AUS 2 weeks ago but didnt get a letter. Was in getting an new screen and they did it then

Here is the information on how to do it Dont know what part nos matter Its the module that shows up as shown in the instructions Just check the label name for your driver's door control module 42. If it has Gen4 at the end then this should work: IF IT HASNT DONT DO IT AS IT WONT WORK ON ANY OTHER ON...

Check the connectors Not unheard of to have a loose one

Have just done a trip of 785km and got 5.605 L per 100km out of my 2.0 TDI.

Travelled at speed limit of 100/110kph all the way Temp was about 30C.

Nice warm day here in Australia.

The rain closure setting actually sounds quite good Blackout112. The footwell lights were quite simple to fit too. :-bd I've fitted the footwell lights now but need to have them programmed too. I don't have the software but maybe I will do the door card warning lights then get them both programmed ...

[URL=http://s376.photobucket.com/user/Hillbilly123_2008/media/IMG_00691.jpg.html][img]http://i376.photobucket.com/albums/oo204/Hillbilly123_2008/IMG_00691.jpg[/img] [/url] [URL=http://s376.photobucket.com/user/Hillbilly123_2008/media/IMG_00651.jpg.html][img]http://i376.photobucket.com/albums/oo204/...

Hi I just wondered if anyone had fitted the kufatec module to enable the remote closure of the tailgate I am also curious how a Octavia can do it with coding but the Passat can't or could a skoda module be fitted to my b7 ? Cheers Chillout As has been said on the watercooled forum is safer not to h...

Had a new battery installed this morning AGM Varta stop/start same as original Cost $411 AU inc fitting.

It was coded in as per the post above because if you dont the car thinks its an old battery and treats it accordingly..

On a highway return trip of 620 miles I get 46mpg or 6L per 100km in my 2011 2.0TDI. I always fill it till i can see it and refill it at the same pump. Is the only accurate way as pumps can cut off at different levels, Ever since I put 41L into a 36L tank in my Patrol I have a healthy disrespect of ...

Booooooooooo Had a look and checked the rather NON informative instruction manual. I have fuse boards in a side panel of the dashboard, almost triangular shaped, photo below, and a fuse box in the engine bay. I looked and looked again once I found a fuse for the 12v supply and it appears I have no ...

I have gen4 max and any of the coding doesnt work. Not through long coding and not changing adaptation channel values. Will have to try eeprom values changed. But not sure if its gonna work on 3aa modules. jaraz Did you go to drivers door/security and enter the popup code It wont work if you dont. ...

Google " Boldsport" who sell replacement door card lights Also on EBay

No they arent a factory option

To store the load cover in my wagon there is two metal pieces on the back of the seats that you slide two matching pieces on the load restraint into them and it sits across the seats when they are lowered forward I found the reason I couldnt remove it was that I hadnt pushed it fully down and it wou...

I changed the battery in one of mine and it worked straight away No coding needed No need to spoil paint removing that cover or anything

GO to ERWIN pay $20 euros and download all the modules for the Passat Easy to do will show you how to do it even.

I use an SD card in my RNS510 Cant be bothered opening the glovebox then the tray PITA

Is a common fault Replace the switch If still under warranty take it back to dealer

chillout1983 wrote:I may have the same information that isn't to be publically shared however it was pm'd to me but I cant get it to work any help would be good , as I did the relevant change's but my mirrors wont auto fold or unfold ?

I sent you a PM did u get it

Yeah will do it tomorrow but not very informative.

could you stick a video up? Sorry got it off a guy on a different forum who doesnt want it posted to the world. Its easy to do but you have to have the same module that mine has. The old way of altering a byte from 90 to 95 doesnt work in my car. Doesnt need a video a school kid could do it in 5 mins

You can buy them on Ebay for about $15 au Work fine as have had one for 4 years

I did mine today in a 2011tTDI It involves coding a byte in Module 47 driver door module and only works if the module is a GEN4 .c1b

Will fold on locking and can either unfold on unlocking the door or putting key in ignition

IT WONT WORK ON ANY OTHER MODULE

I had a thread on this a while ago and tried the coding and it didnt work Also bought one of the OBDII dongles and that was a waste of money also. When I tried the coding it accepted it but failed to retract the mirrors Have left it as was coded for retraction but it never has, no matter how many ti...