UKPassats

Under the cambelt cover on the side of the engine.

I'm also looking at sacking off the swirl flaps. Im pretty sure if you blank off the vac hose to the flap controller there should be no need to map out. Also you'll need slightly longer blots for the cast manifold.

@Hypeculture

@Thebigmeet16

B6 estate.

I don't have any photos but the heater core hoses are directly behind the intake pipe. Which I removed for ease of access. The top hose is the inlet and bottom the outlet, since the direction of the pumped water only ever goes in one direction it's a good idea to start off reverse flushing it to sta...

Bit of an update on this. So after following Richards advice no amount of burping the system worked no matter what I did. However after locating the heater core pipes I flushed the core with water both forward and backwards replaced it all back as it was and now glorious heat is now flowing through ...

Thanks RichardSEL. Hopefully I'll get some time later to try that.

Hi Guys. Got a problem with the heater on my B6 170 BMR. Blower works on all speeds but the temperature doesn't get hot. It gets warm and if you have it on the slowest fan setting stays warm but does not get hot. If you speed up the fan the heat disappears completely. I've topped up the coolant a li...

Remove stereo from the dash unclip the quadlock on the back wait a min or so and reconnect. It should now eject.

When we bought ours no cds would load and it just said no disc.
I did the above and 6 discs got spat out.

I've been trying to get this app to work it seams to take forever searching for the car then either hangs on that screen or comes up error. I'm using a galaxy note4 so plenty of power to run the app. I'm wondering if the elm327 adapter isn't compatible. It works absolutely perfect on torque pro app....

I'd also try beefing up the ground cable/connection . Does your line converter also have a ground if so do the same to that.

Fitted hid in mine other week but led sidelights were still in the post are they hassle to fit?

How much for the MAF? I'm fearing I may have a similar problem

Be careful here pal. Some are 50mm struts some are 55mm.