UKPassats

Ey up!

Anyone recommend a VW savvy auto electrician in the North Manchester area?

Few issues on my 2011 B7 TDi bluemotion wagon and the wifes 2003 Bug.

Cheers

j

Ey up,

Sorted out the first issue. Simply cleaned out the TPS of the carbon gunk buildup and cleared all the DTCs at the weekend. Plenty of yootoob videos.

Thus far, no MIL light has popped back up.

Will scan with vcds at weekend and see what else pops up.

j

Cheers guys, will do as recommended and much like the B5, B5.5 before, live with it a while and see.

* Used a licensed version of vcds and saved the DTCs, so will clear them and see what pops up.
* Battery regulator, will check.

j

Hi guys, The B5.5 was beyond economic repair, so bit the bullet and got a B7 the other week, Bluemotion tech 2.0TDI estate jobbie and would like some DTC pointers/help please........ Address 01: Engine (J623-CFFB) Labels: 03L-906-018-CFF.clb Part No SW: 03L 906 018 BF HW: 03L 907 309 N Component: R4...

Cheers Craig, will do as your comment

Sent from my moto g(7) power using Tapatalk

Ey up Craig,

Ahh yes, think I know what you're on about. Will have a look. Obviously drivers side, yes?

How did you block it off? Gather it will be evident when I take a look?

j

Ey up Gaz. Yep, done all four doors with new butyl tape. Double checked by dusting talcum powder at bottom of doors and sills. No evidence of run marks, dry as a bone. FYI - Its just the drivers side, initially wet under the drivers feet and obviously ran to rear passenger footwell, behind driver. T...

Cheers for reply. Did that as well. That is to say, whilst doing the ECU box, cleaned the bonnet grommet area and packed the butyl tape around the grommet, creating another 'skin'.

.....where else would it come in?

Bit of history, done the usual suspects (cabin filter/ECU/plenum holes) as per the how tos on here and water is still getting in. Think it may be coming from around the steering column, where it goes through the bulkhead.

Anyone?

j

Yes please. Sorry to fart you around

Gazwould wrote:

[emoji23][emoji1787]

Sent from my moto g(7) power using Tapatalk

On doors, check door speakers for leaking, especially if OEM ones been replaced with aftermarket speakers. Had that issue some years ago myself. Especially leaked when car was parked on curved roads with lower sides. Took good while until I found where water comes in, because when parked on level, ...

Maybe the water ingress is from your tears of frustration Jan hardeehaa Sent from my SM-G955F using Tapatalk Oh how I wish they were. Easy to remedy. Quick fix for NSF regulator seal has done the trick. Next weekend, putting it all back together and hoping it rains before hand to double check for w...

Ey up minimental, Cheers for reply. Thought that also. Did a bit of investigation before going other routes. Removed the wiper motor assembly. The bolt in the middle goes through the top of the bulkhead and is a hole through to inside. Butyl putty washer applied. Also, under the ECU box, the seam se...

....its not one of the usual suspects. Hi all, 2005 B%.% TDi estate Highline. Firstly, done the plenum unplugging when first got the car, the ECU gasket reseal, resealed the pollen filter (butyl tape) and all doors (window regulator perimeter seals) have either been resealed or in good order and do ...

gtijames wrote: ↑Sun Dec 15, 2019 2:48 pm I didn't need a cage in mine for pioneer double din, just the plastic facia adaptor think it was a cheap ebay one and fits fine

Interesting. Cheers for reply James.

...I'm after a double din, Android, 7" jobbie, preferably a Pumpkin. Read up a little with reference to Mindriots comments on said head unit/s. FYI - To fitted into a 2005 B5.5 estate, TDI highline - Was original Gamma unit and CD unit in the double din space. Now has a single din aftermarket u...

Bought some second hand (the above) wheels. The bolts I got with them are the wrong ones ie they have radius'd seats and tapered is required, which I now have. But, they are too long. The threaded bit on the new bolts are 28mm, apparently the right length but they catch. Can someone please measure t...

Tried a Polo forum and alas, no reply!!!! Sooooo, I thought I'd try you knowledgeable lovely peeps. FYI - 2002 9n 1.2 12v AZQ VAGCOM throws up ... 16804/P0420/001056 - Catalyst System; Bank 1: Efficiency Below Threshold Ross-Tech suggest the below. Possible Causes Leakage in Intake and/or Exhaust Sy...

D

Sent from my etch a sketch using Tapatalk

Cheers guys for replies. Yeah, boils down to £££. Used the cheapo ones before with very little issues once set up correctly. As mentioned in original post, I bought one a fair few years back, fitted and forgot. Not an issue. If I had the link of original purchase, Id of bought that kit again. Anyhoo...

OK, Cheers jimbof. Just trying to understand what the issue is as it was working.

Sent from my SM-J500F using Tapatalk

Can't be bothered with the vagcom, quick check with the other jobbie, this is all that it throws up[IMG]https://uploads.tapatalk-cdn.com/201706 ... 736871.jpg[/IMG]

Sent from my SM-J500F using Tapatalk

Hmmmm! No coolness of air. I shall run VAG of the COM again.

j

BIG F@ TW@ wrote: ↑Mon Jun 26, 2017 4:11 pm

janski wrote:mines 20mm.

j

That's what Ewa says [emoji6] [emoji15] [emoji3]

Sent from my SM-G930F using Tapatalk

Child!

j