Ey up!
Anyone recommend a VW savvy auto electrician in the North Manchester area?
Few issues on my 2011 B7 TDi bluemotion wagon and the wifes 2003 Bug.
Cheers
j
Search found 140 matches
- Thu Jul 22, 2021 10:00 am
- Forum: B7 PASSAT -2011 on..
- Topic: Recommend an auto electrician North Manchester
- Replies: 0
- Views: 551
- Tue Jul 20, 2021 6:07 am
- Forum: B7 PASSAT -2011 on..
- Topic: Moved onto a B7 from a B5.5, some DTC help please
- Replies: 4
- Views: 654
Re: Moved onto a B7 from a B5.5, some DTC help please
Ey up,
Sorted out the first issue. Simply cleaned out the TPS of the carbon gunk buildup and cleared all the DTCs at the weekend. Plenty of yootoob videos.
Thus far, no MIL light has popped back up.
Will scan with vcds at weekend and see what else pops up.
j
Sorted out the first issue. Simply cleaned out the TPS of the carbon gunk buildup and cleared all the DTCs at the weekend. Plenty of yootoob videos.
Thus far, no MIL light has popped back up.
Will scan with vcds at weekend and see what else pops up.
j
- Thu Jul 15, 2021 6:17 am
- Forum: B7 PASSAT -2011 on..
- Topic: Moved onto a B7 from a B5.5, some DTC help please
- Replies: 4
- Views: 654
Re: Moved onto a B7 from a B5.5, some DTC help please
Cheers guys, will do as recommended and much like the B5, B5.5 before, live with it a while and see.
* Used a licensed version of vcds and saved the DTCs, so will clear them and see what pops up.
* Battery regulator, will check.
j
* Used a licensed version of vcds and saved the DTCs, so will clear them and see what pops up.
* Battery regulator, will check.
j
- Wed Jul 14, 2021 7:42 pm
- Forum: B7 PASSAT -2011 on..
- Topic: Moved onto a B7 from a B5.5, some DTC help please
- Replies: 4
- Views: 654
Moved onto a B7 from a B5.5, some DTC help please
Hi guys, The B5.5 was beyond economic repair, so bit the bullet and got a B7 the other week, Bluemotion tech 2.0TDI estate jobbie and would like some DTC pointers/help please........ Address 01: Engine (J623-CFFB) Labels: 03L-906-018-CFF.clb Part No SW: 03L 906 018 BF HW: 03L 907 309 N Component: R4...
- Sun Jan 17, 2021 8:31 am
- Forum: B5 & B5.5 PASSATS
- Topic: Apart from the usual water ingress places....
- Replies: 9
- Views: 821
Re: Apart from the usual water ingress places....
Cheers Craig, will do as your comment
Sent from my moto g(7) power using Tapatalk
Sent from my moto g(7) power using Tapatalk
- Sat Jan 16, 2021 11:11 am
- Forum: B5 & B5.5 PASSATS
- Topic: Apart from the usual water ingress places....
- Replies: 9
- Views: 821
Re: Apart from the usual water ingress places....
Ey up Craig,
Ahh yes, think I know what you're on about. Will have a look. Obviously drivers side, yes?
How did you block it off? Gather it will be evident when I take a look?
j
Ahh yes, think I know what you're on about. Will have a look. Obviously drivers side, yes?
How did you block it off? Gather it will be evident when I take a look?
j
- Fri Jan 15, 2021 12:01 pm
- Forum: B5 & B5.5 PASSATS
- Topic: Apart from the usual water ingress places....
- Replies: 9
- Views: 821
Re: Apart from the usual water ingress places....
Ey up Gaz. Yep, done all four doors with new butyl tape. Double checked by dusting talcum powder at bottom of doors and sills. No evidence of run marks, dry as a bone. FYI - Its just the drivers side, initially wet under the drivers feet and obviously ran to rear passenger footwell, behind driver. T...
- Fri Jan 15, 2021 7:28 am
- Forum: B5 & B5.5 PASSATS
- Topic: Apart from the usual water ingress places....
- Replies: 9
- Views: 821
Re: Apart from the usual water ingress places....
Cheers for reply. Did that as well. That is to say, whilst doing the ECU box, cleaned the bonnet grommet area and packed the butyl tape around the grommet, creating another 'skin'.
- Thu Jan 14, 2021 3:36 pm
- Forum: B5 & B5.5 PASSATS
- Topic: Apart from the usual water ingress places....
- Replies: 9
- Views: 821
Apart from the usual water ingress places....
.....where else would it come in?
Bit of history, done the usual suspects (cabin filter/ECU/plenum holes) as per the how tos on here and water is still getting in. Think it may be coming from around the steering column, where it goes through the bulkhead.
Anyone?
j
Bit of history, done the usual suspects (cabin filter/ECU/plenum holes) as per the how tos on here and water is still getting in. Think it may be coming from around the steering column, where it goes through the bulkhead.
Anyone?
j
- Mon Apr 27, 2020 9:31 am
- Forum: B5 & B5.5 PASSATS
- Topic: Water ingress...still! Done all the usual bits, however....
- Replies: 10
- Views: 956
Re: Water ingress...still! Done all the usual bits, however....
Yes please. Sorry to fart you around
- Sun Apr 26, 2020 5:05 pm
- Forum: B5 & B5.5 PASSATS
- Topic: Water ingress...still! Done all the usual bits, however....
- Replies: 10
- Views: 956
Re: Water ingress...still! Done all the usual bits, however....
[emoji23][emoji1787]Gazwould wrote:
Sent from my moto g(7) power using Tapatalk
- Sun Apr 26, 2020 5:03 pm
- Forum: B5 & B5.5 PASSATS
- Topic: Water ingress...still! Done all the usual bits, however....
- Replies: 10
- Views: 956
Re: Water ingress...still! Done all the usual bits, however....
On doors, check door speakers for leaking, especially if OEM ones been replaced with aftermarket speakers. Had that issue some years ago myself. Especially leaked when car was parked on curved roads with lower sides. Took good while until I found where water comes in, because when parked on level, ...
- Sun Apr 26, 2020 4:28 pm
- Forum: B5 & B5.5 PASSATS
- Topic: Water ingress...still! Done all the usual bits, however....
- Replies: 10
- Views: 956
Re: Water ingress...still! Done all the usual bits, however....
Maybe the water ingress is from your tears of frustration Jan hardeehaa Sent from my SM-G955F using Tapatalk Oh how I wish they were. Easy to remedy. Quick fix for NSF regulator seal has done the trick. Next weekend, putting it all back together and hoping it rains before hand to double check for w...
- Sun Apr 26, 2020 12:58 pm
- Forum: B5 & B5.5 PASSATS
- Topic: Water ingress...still! Done all the usual bits, however....
- Replies: 10
- Views: 956
Re: Water ingress...still! Done all the usual bits, however....
Ey up minimental, Cheers for reply. Thought that also. Did a bit of investigation before going other routes. Removed the wiper motor assembly. The bolt in the middle goes through the top of the bulkhead and is a hole through to inside. Butyl putty washer applied. Also, under the ECU box, the seam se...
- Sun Apr 26, 2020 8:36 am
- Forum: B5 & B5.5 PASSATS
- Topic: Water ingress...still! Done all the usual bits, however....
- Replies: 10
- Views: 956
Water ingress...still! Done all the usual bits, however....
....its not one of the usual suspects. Hi all, 2005 B%.% TDi estate Highline. Firstly, done the plenum unplugging when first got the car, the ECU gasket reseal, resealed the pollen filter (butyl tape) and all doors (window regulator perimeter seals) have either been resealed or in good order and do ...
- Sun Dec 15, 2019 5:32 pm
- Forum: B5 & B5.5 PASSATS
- Topic: RE: After market double din fitting Q...
- Replies: 2
- Views: 789
- Sun Dec 15, 2019 11:08 am
- Forum: B5 & B5.5 PASSATS
- Topic: RE: After market double din fitting Q...
- Replies: 2
- Views: 789
RE: After market double din fitting Q...
...I'm after a double din, Android, 7" jobbie, preferably a Pumpkin. Read up a little with reference to Mindriots comments on said head unit/s. FYI - To fitted into a 2005 B5.5 estate, TDI highline - Was original Gamma unit and CD unit in the double din space. Now has a single din aftermarket u...
- Wed Jul 11, 2018 6:16 am
- Forum: B5 & B5.5 PASSATS
- Topic: Anyone got some 3SDM's 00.6 that can do me a favour?
- Replies: 0
- Views: 1519
Anyone got some 3SDM's 00.6 that can do me a favour?
Bought some second hand (the above) wheels. The bolts I got with them are the wrong ones ie they have radius'd seats and tapered is required, which I now have. But, they are too long. The threaded bit on the new bolts are 28mm, apparently the right length but they catch. Can someone please measure t...
- Sun Jul 02, 2017 3:27 pm
- Forum: OTHER VAG OR NON . .
- Topic: Polo Q - How do you Perform Oxygen Sensor Aging Check amongst others?
- Replies: 1
- Views: 10082
Polo Q - How do you Perform Oxygen Sensor Aging Check amongst others?
Tried a Polo forum and alas, no reply!!!! Sooooo, I thought I'd try you knowledgeable lovely peeps. FYI - 2002 9n 1.2 12v AZQ VAGCOM throws up ... 16804/P0420/001056 - Catalyst System; Bank 1: Efficiency Below Threshold Ross-Tech suggest the below. Possible Causes Leakage in Intake and/or Exhaust Sy...
- Thu Jun 29, 2017 7:54 pm
- Forum: GENERAL CHAT
- Topic: I've just ordered a proper VCDS cable from Gendan and had the best email back...
- Replies: 6
- Views: 2942
Re: I've just ordered a proper VCDS cable from Gendan and had the best email back...
D
Sent from my etch a sketch using Tapatalk
Sent from my etch a sketch using Tapatalk
- Wed Jun 28, 2017 11:40 am
- Forum: B5 & B5.5 PASSATS
- Topic: Control arm kits....
- Replies: 15
- Views: 4830
Re: Control arm kits....
Cheers guys for replies. Yeah, boils down to £££. Used the cheapo ones before with very little issues once set up correctly. As mentioned in original post, I bought one a fair few years back, fitted and forgot. Not an issue. If I had the link of original purchase, Id of bought that kit again. Anyhoo...
- Tue Jun 27, 2017 6:42 pm
- Forum: B5 & B5.5 PASSATS
- Topic: V71 air flow flap positioning motor.....
- Replies: 10
- Views: 4229
Re: V71 air flow flap positioning motor.....
OK, Cheers jimbof. Just trying to understand what the issue is as it was working.
Sent from my SM-J500F using Tapatalk
Sent from my SM-J500F using Tapatalk
- Tue Jun 27, 2017 6:14 pm
- Forum: B5 & B5.5 PASSATS
- Topic: V71 air flow flap positioning motor.....
- Replies: 10
- Views: 4229
Re: V71 air flow flap positioning motor.....
Can't be bothered with the vagcom, quick check with the other jobbie, this is all that it throws up[IMG]https://uploads.tapatalk-cdn.com/201706 ... 736871.jpg[/IMG]
Sent from my SM-J500F using Tapatalk
Sent from my SM-J500F using Tapatalk
- Tue Jun 27, 2017 6:01 pm
- Forum: B5 & B5.5 PASSATS
- Topic: V71 air flow flap positioning motor.....
- Replies: 10
- Views: 4229
Re: V71 air flow flap positioning motor.....
Hmmmm! No coolness of air. I shall run VAG of the COM again.
j
j
- Tue Jun 27, 2017 5:56 pm
- Forum: B5 & B5.5 PASSATS
- Topic: Control arm kits....
- Replies: 15
- Views: 4830
Re: Control arm kits....
Child!BIG F@ TW@ wrote: ↑Mon Jun 26, 2017 4:11 pmThat's what Ewa says [emoji6] [emoji15] [emoji3]janski wrote:mines 20mm.
j
Sent from my SM-G930F using Tapatalk
j