Search found 312 matches

by Twincam
Sun Aug 16, 2020 8:25 am
Forum: B5 & B5.5 PASSATS
Topic: Fault code help
Replies: 5
Views: 1901

Re: Fault code help

Dan,

Where in the Uk are you? Would be recommended getting someone with VCDS or similar to scan the Passat for codes
by Twincam
Mon Mar 16, 2020 10:51 pm
Forum: B6/CC PASSATS
Topic: VCDS owners list
Replies: 4
Views: 784

Re: VCDS owners list

Is there a map on the top of the forum?

I'm in East London (Ilford/Hornchurch) if you're down this way?
by Twincam
Fri Mar 06, 2020 4:00 pm
Forum: B6/CC PASSATS
Topic: Replacing Parking Light B6
Replies: 1
Views: 814

Re: Replacing Parking Light B6

You've got the Xenon type as opposed to a Halogen Headlight.

I've only ever replaced the parking lights when I pulled the front bumper off to do the D1S xenon bulb so unsure if it can be done in situ (I'd imagine you could but never checked)
by Twincam
Wed Mar 04, 2020 5:24 am
Forum: B6/CC PASSATS
Topic: Possible blown engine
Replies: 7
Views: 837

Re: Possible blown engine

Another thing that crossed my mind, if the cambelt was just done, has the tensioner stud in the head become loose and allowed the timing to move?

Pop the left cover off slightly (one over the cam sprockets) and feel the tension on the belt (I've had that stud loosen twice)
by Twincam
Tue Dec 10, 2019 6:02 pm
Forum: B6/CC PASSATS
Topic: Where to buy vw parts other than Stealers
Replies: 6
Views: 1097

Re: Where to buy vw parts other than Stealers

Have you tried the parts department?

viewtopic.php?f=164&t=90961
by Twincam
Sat Nov 09, 2019 4:37 pm
Forum: B5 & B5.5 PASSATS
Topic: Best DTC reader options
Replies: 2
Views: 658

Re: Best DTC reader options

VCDS which is also known as Vag Com, don't skimp on clone leads.

Unless you're in need of something that does multiple manufacturers or is it purely for a VAG vehicle?
by Twincam
Sat Oct 26, 2019 8:46 am
Forum: CAR RELATED CHAT
Topic: Parts supplier
Replies: 5
Views: 2137

Re: Parts supplier

You've got Ali Express and ali baba... quite a lot get switches from eBay too.
by Twincam
Mon Oct 14, 2019 8:09 pm
Forum: B6/CC PASSATS
Topic: Aftermarket radio
Replies: 5
Views: 1336

Re: Aftermarket radio

VCDS (the full version) can reset the light, as said above, the small light below the radio (fitted into the surround) is linked to the air bag system so an ignition on when it was removed probably accounts to the light being on.
by Twincam
Wed Oct 09, 2019 3:15 pm
Forum: B6/CC PASSATS
Topic: Aftermarket radio
Replies: 5
Views: 1336

Re: Aftermarket radio

On mine I used a fuse holder with a break our wire from the driver side fuse box - I pulled the compartment off to allow for better access. I've also seen some do a fuse on the engine bay but as I was installing a dash cam too I just used break out wires. You'll need to isolate a switched live for t...
by Twincam
Thu Sep 26, 2019 4:58 am
Forum: B6/CC PASSATS
Topic: Oil pump balance shaft
Replies: 32
Views: 3827

Re: Oil pump balance shaft

Do you know what they should be torqued to? The studs where replaced but don't think lock tight was used Sent from my SM-J610FN using Tapatalk https://pmmonline.co.uk/technical/installing-checking-new-timing-belt-tensioner-stud/ Some say the stud is best left alone if still tight in the head. Most ...
by Twincam
Thu Jun 20, 2019 5:12 am
Forum: B6/CC PASSATS
Topic: Front Drop Link Replacement
Replies: 14
Views: 1702

Re: Front Drop Link Replacement

Try undoing it with a 18mm socket first, all four spun when I tried. First one I used an able grinder on however was easier for me to ram a pair of mole grips onto the ball/cup side (there's a circular disc/washer you can get a grip into) and then just use a 18mm to drop it off. My replacement ones ...
by Twincam
Sun Apr 21, 2019 3:52 pm
Forum: B6/CC PASSATS
Topic: Torque settings for injectors and camshaft
Replies: 4
Views: 1430

Re: Torque settings for injectors and camshaft

DMitch16 wrote: Sat Apr 20, 2019 9:09 am
Twincam wrote: Sat Apr 20, 2019 7:35 am
DMitch16 wrote: Fri Apr 19, 2019 7:42 pm

PM me your email address, I have something very useful for you ;)
Would that also be useful for the 2.0 BKP engine by any chance?
Not this one but I have something for the BKP too!

I'll message you on here bud
by Twincam
Sat Apr 20, 2019 7:40 am
Forum: B6/CC PASSATS
Topic: manual 6 speed gears hard to select
Replies: 5
Views: 1274

Re: manual 6 speed gears hard to select

In the engine bay under the air box, you'll see the gear linkages that come from the back of the bulkhead (they go under the bulkhead via the tunnel but are protected by the exhaust heat shield). There is adjustment on the ends but I'm not sure what one does first and reverse. My cable totally rippe...
by Twincam
Sat Apr 20, 2019 7:35 am
Forum: B6/CC PASSATS
Topic: Torque settings for injectors and camshaft
Replies: 4
Views: 1430

Re: Torque settings for injectors and camshaft

DMitch16 wrote: Fri Apr 19, 2019 7:42 pm
thedebs53 wrote: Fri Apr 19, 2019 11:07 am Hi all, does anyone know the settings as above please. B6 1.9TDI 2007
Cheers
Dave
PM me your email address, I have something very useful for you ;)
Would that also be useful for the 2.0 BKP engine by any chance?
by Twincam
Sun Mar 24, 2019 7:41 am
Forum: B6/CC PASSATS
Topic: Oil leaks, most common areas??
Replies: 2
Views: 936

Re: Oil leaks, most common areas??

Might be an idea to use engine degreaser and pressure wash the engine first, then monitor and check where any oil is coming from. Looking down from the top, you should hopefully be able to see where roughly (ie front or back) it is coming from (back would be harder). If you have a boost leak you may...
by Twincam
Mon Mar 04, 2019 4:38 pm
Forum: B7 PASSAT -2011 on..
Topic: Ballast Replacement
Replies: 3
Views: 1401

Re: Ballast Replacement

Pulling the bumper off seems hard but it's very simple once you've done it a few times. I usually lean it out of the way so I dont have to remove the headlight washer tubes. Once the under tray is off, inner wheel arches (I usually undo the forward screws), then under the headlight (looking towards ...
by Twincam
Sat Feb 09, 2019 10:39 am
Forum: B5 & B5.5 PASSATS
Topic: Route of boot release cable - saloon b5.5
Replies: 2
Views: 972

Re: Route of boot release cable - saloon b5.5

Anyone?

Maybe someone breaking a saloon Passat would do me a favour and pull the rear cover off? Pleeeaaaassseee?
by Twincam
Fri Feb 08, 2019 9:10 pm
Forum: B6/CC PASSATS
Topic: EPB alarm sounding but no actual fault
Replies: 5
Views: 1402

Re: EPB alarm sounding but no actual fault

Where in the country are you? Youd want to do a fault scan using VCDS.

Mine has the EPB sign on the dash (yellow light) along with a error message on the display however they both still work fine.
by Twincam
Thu Feb 07, 2019 9:07 pm
Forum: B5 & B5.5 PASSATS
Topic: Route of boot release cable - saloon b5.5
Replies: 2
Views: 972

Route of boot release cable - saloon b5.5

Hi guys, Wondering if you could help. The old man decided to remove the rear cable off his saloon b5.5 for me to order a new cable (end snapped). Lo and behold he's forgotten the route of the cable. With the boot open, the cable attaches to the latch, then goes via the key lock and into the actuator...
by Twincam
Tue Feb 05, 2019 6:01 am
Forum: B6/CC PASSATS
Topic: Change Oil Pump ? Or Not ?
Replies: 8
Views: 1887

Re: Change Oil Pump ? Or Not ?

Changing just the hex drive (which would be 77mm long) will not rectify the issue. The balance shaft which the hex key goes into is also to blame - there are a few threads on here about it. What you want is the longer solid 100mm hex drive, a regenerated balance shaft, gasket sealant and a new set o...
by Twincam
Mon Feb 04, 2019 9:23 pm
Forum: B6/CC PASSATS
Topic: Injector Issue & ASV - will it eventually stop?
Replies: 5
Views: 1657

Re: Injector Issue - will it eventually stop?

For anyone reading, would anyone know what would happen if I disconnect the ASV via the plug on the side? Its constantly spinning when I put the ignition on.
by Twincam
Mon Feb 04, 2019 9:18 pm
Forum: B6/CC PASSATS
Topic: Injector Issue & ASV - will it eventually stop?
Replies: 5
Views: 1657

Re: Injector Issue - will it eventually stop?

Cheers mate, I've had the loom off before so I'll give it a quick look :-bd
by Twincam
Mon Feb 04, 2019 6:45 pm
Forum: B6/CC PASSATS
Topic: Injector Issue & ASV - will it eventually stop?
Replies: 5
Views: 1657

Re: Injector Issue - will it eventually stop?

Also, Looking at the injector fault code 17678, it occurred at 98k miles... I'm now on 99k so I can only but imagine it has been a stored fault code which hasn't put anything on the dash? The over boost happened on the way back from Dartford yesterday and the ASV error occurred 6 miles ago. Would th...
by Twincam
Mon Feb 04, 2019 6:38 pm
Forum: B6/CC PASSATS
Topic: Injector Issue & ASV - will it eventually stop?
Replies: 5
Views: 1657

Injector Issue & ASV - will it eventually stop?

Good evening gents (and ladies if there are any!) Today my lovely 06 Passat (2.0 TDi BKP) decided it would flag up a flashing coil light (and display engine workshop) on the way to work. The usual turn off and restart didn't remove it (I have at times had an over boost error code) and subsequently, ...
by Twincam
Sat Jan 26, 2019 1:49 pm
Forum: CAR RELATED CHAT
Topic: Can 'o' Worms Time...tyre pressures
Replies: 10
Views: 2738

Re: Can 'o' Worms Time...tyre pressures

I've always sat at 38 all round on the 225/40/18, on the van I've got higher load rated tyres and increase the pressure accordingly.