UKPassats

maybe its group 1 and i didnt hit go, hmm ill have to check

Hi guys, my 2012 cc reports are issue with the abs/esp and also as a result the TPMS system. I scanned it with VCDS and it says the there is an incorrect signal from the rear left sensor. I took off the wheel and looked, it seems like the wiring is all good, not torn or damaged. I took out the senso...

Hi guys,
Any of you try the V10 or V9 2017/2018 Europe west maps for the RNS315. I think mine is a bit outdated(2012 CC).
I think the navigation is pretty good but I was wondering of i would notice the 2018 maps being much different or features etc?
Thanks in advance

Hi guys, looking for some info on some possilbe future mode for my 12 CC gt. I was thinking of fitting an emblem reverse cam, i have VCDS and my rns315 has the black camera port. Ive seen a few on ali express with a CVS converter box thing, anyone have these? I think they might not be highline editi...

Hi guys, having sold on my 05 passat sport, I have switched to a 12 facelift VW CC GT, which is fantastic. I wanted to update the tired looking DRL bulb, is it just a P21W or 382 bulb? Anyone fit any nice LED versions? Also any recomend anything for the corner light (H7?) or the front fogs, somethin...

Hi, I had this issue too, the fuses are, the relays are fine. VCDS shows a ground or open circuit on mine, did you scan yours? My motor was also fine, the wiring must have failed inside my car as it removed the pump motor wiring to expose it under the bonnet and it was fine. I had the relay CECM or ...

Hi, Im going to disconnect the battery on my 12 CC, as i am working with its EPB motor. My VCDS lead stopped working and i am waiting on a new one. I dotn want any EPB lights so I am going to disconnect the battery and wind the epb back with my 12V battery pack so I can change the pads. I also want ...

the NCT here only specifies that a speedometer is: fitted, working and is visible from the drivers seat, so technically it could be outside on the bonnet and still pass :hyst :hyst :hyst :hyst :hyst reference (page 28, NCT Manual for passenger vechicles up to 8 seats):https://www.ncts.ie/media/1004/...

Anyone know about the mph speedo in a kmh car? I know. It will work., but I bet he will fail his countries mot . He has to buy custom dials for convertion. I did convert my premium speedo. Its lhd one and bought mph dials from lockwood. JARAZ Hi Jaraz, they are GB clocks, I used them here in Irelan...

Anyone know about the mph speedo in a kmh car?

Hi guys, Just a quick question about the white cluster, i lm not sure but if I have a car thar has the old blue cluster that reads in Kmh and want to put in my white clocks in Mph will there be an issue? I only ask as a guy is interested in buying them, I also have vcds in case there is something I ...

Ive been messing with it and it seems that there is no power getting to the motor and the fuse seems ok, I did have the dash panel off to get at the terminal 15 relay as it had failed, i also removed and refitted a bunch of relays including ones marked 449, i wonder is there one there on the CECM fo...

Thanks Mindriot, unfortuantely I dont have the manual and the fuse panels dont have a legend on them. But as you suggested I googled and found that its either fuse 39 on the drivers side (10A) or fuse 42 on the passenger side (15A). None of the fuses are blown. A diagnostic check with VCDS shows tha...

Thanks Richard, Im glad its sorted so at least it can drive lol

Hi thanks for the reply,
I havent actually checked the fuse, do you know off hand what side its on, the driver or passenger. Ill go outside and check its just freezing and dark lol
Thanks

Hi, I just noticed that my widnscreen washer jets arent pumping, the pump doesnt seem to be running at all, about two weeks ago my terminal 15 relay went kaput and I changed it thanks to Jareds advice which was wonderfully precise. I wonder are they related, I was bust fixing the car in the mean tim...

Just an update, it turns out the cambelt tensioner stud pulled itself out of the crappy aluminium head. I fixed this by changing the standard M8 x 1.25mm X 73mm stud with the newer m8 x1.25 + m10x1.5 stud. This was easy enough to do, however after retiming the car it did run but was smoky and down o...

if I remember correctly the two marked "460" Hi Jarek, I had a look and replaced the relay, there are two 460 relays, one for K75 and one for you guessed it terminal 15 or K15. changed that and it works. Thanks for your help, really appreciate it!!!!!!!!!!!!!! ^:)^ ^:)^ ^:)^ ^:)^ ^:)^

Jarek wrote: ↑Fri Nov 10, 2017 10:41 pm Check relays on CECM (driver side behind small compartment on the right near the doors).


Sent from my iPhone using Tapatalk

Thanks Jarek,
Do you know any particular one to check?
also are the ignition switched bad on these?
thank you

Hi, my Passat BKP has been sitting up for a few days and I just went to start it and it ran, when I came back the engine was shut down. I tried to restart it but the ignition wouldn't come on, although the steering locked/unlocked, radio and HVAC came on. apart from the odometer there is no life in ...

Hi, my Passat BKP has been sitting up for a few days and I just went to start it and it ran, when I came back the engine was shut down. I tried to restart it but the ignition wouldn't come on, although the steering locked/unlocked, radio and HVAC came on. apart from the odometer there is no life in ...

Should be the same as the BMR but the easy way to determine what you have on your car is to see where the arrow is on the crank cog behind the pulley. It can only match up to one tool because the arrow will either be in the middle of a tooth or in the middle of the groove between the teeth. One too...

Hi, Does anyone know which of the timing tools I need to use for the crankshaft or where it locks at 1 o clock or 12 o clock, the kits usually come with both I know but has anyone timed theirs and saw roughly what position it locks in, IIRC one o clock? Will only the correct crank tool fit too,as on...

Hi guys, Ive got my 05 passat with the white MFA clocks from a 2009, I have the J revision CAN gateway in my car. Can someone confirm if its possible to change the red clocks to the white clocks with only the cluster, conversion cable and trims and it will work or do you need a minimum revision gate...

thanks guys, my mate has the car as one to break as he sells spares, he says the engine starts and runs no problem but was saying to me about it having 187k and not being sure about it and to be cautious as he has no history with it. I really only need it for a while and then ill put it off the road...