UKPassats

Yeah battery disconnected and left for. Good half a hour prior to working on them and will r left once again prior to plugging sears back into the circuit

Link to the picture of the to plugs the smaller plug is the b6 loom the larger the b7 to seat

[img]https://www.dropbox.com/s/krzd4ic5r38n4 ... 1.jpg?dl=0[\img]

Thanks for that I’m now paronoid about plugging em back in :-bd I can’t shake the feeling that I should have followed the wire colours not pin location it’s probably the fact I’m a sparky and over thinking things. Anyway b7 airbag wiring in the seats is Brown pin 1 assuming ground for system White p...

Right I installed my b7 seats a few months back but air bag plugs different car is due to be p/x’d this week against a eos (I know ) so need to get plugs sorted i plan to use my old plugs from old seats and splice into the new ones. The wiring to the car is as follows White Green Brown The wiring fr...

Anyone

Pics kind of sorted thanks to handy attachment function top woek

Anyone know the part number to driver side front jack cover to the r line skirts and if possible a link to where the cane be purchasers mine ejected itself somewhere between hull and Nottingham

Tried looking on the others but no part numbers printed on them

had the car a little over 2 years but recently decided to start throwing some cash on mods for it so in last 6 months shes had the following b7 sport seats (door cards awaiting fitting) fly eyed front and rear lights heko wind deflectors merc 19" turbine alloys Apex 40mm springs and new top mou...

Just when I thought I was getting somewhere fitting my new front springs and finnaly getting driveshaft nut loose I now can’t get the arm to separate from ball joint mounting I’ve taken the 3 14mm nuts off the bottom and it won’t move. I’ve tried shocking it with hammer tried levering it apart still...

Got the drive shaft but loose with aid of a 4 m cheater bar lol.

But immediately hit a new issue took the 3 nuts holding lower arm to ball joint assembly and the arm isn’t shifting tried to lever it out gentle persuasion with hammer and it’s juat anyone else had this problem ?

Just tried to gun them off still not budging after some serious attacking going to leave and drop down to local garage and see if they can shift them gives me chance to order new bolts as didn't get chance to before

Got spring compressors on with a little work and gradually taking up the tension. As I slowly jacked the arm up problem now is the hub won't let go of strut even with it opened up slacked it with lube and it just ita moveing it's like strut has fused to the arm. Need the car for work on Tuesday so m...

Fitting lowering springs to Passat rears have gone on in no time but fronts I have immediately hit issues firstly all guides I've seen have said that drive shaft but needs removing to get enough drop to get strut out? This is fine but mine ain't coming undone my breaker bar is on verge on breaking i...

Seats are in but air bag plugs are different as is colour of wiring is it just simply tracing which wire goes to same pin on each plug and replicating? Also with door cards how have people relocated the boot release as b7 doesn't have one on door card?

I'm currently bidding on a b7 interior on ebay which I intend to fit in my B6 I am correct in thinking there is no major differences in the interior of the b7 over the B6 mine is a 2010 b6 if that helps

sweeping indicators on the rear b6 lights would look even cooler if anyone could figure out a way of getting it to work

the issues with the fix could well explain the sudden drop in px values also

theres just no point in me getting rid of mine atm only reason I considered the skoda was the 2k deposit contribution they offered which effectively killed my neg eq I have in the car, but I just cant justify letting her go atm for that kind of cash Im going to hold onto it for now and sit it out, b...

Funnily enough pre media noise on diesels and webuy any car offered £4275 this last week that price has now dropped to £3450. And I quite liked the 1.2tsi compared to cr I found it very responsive (mines only 110bhp)

ive been contemplating getting rid of my 09 plate passat tdi r line for a few months now and have looked at a number of replacements mainly skodas due to the new fabia monte carlo be a lovely car to drive and the spec is incredible and the 1.2 tsi is a great little engine aswell. the problem is I ju...

mine have zero electric adjustment everything is manual (R line tdis are poverty spec apart from bodykit dont even have rear electric windows :hyst ) I seats as such will be a dead easy swap like you say its just getting the electical side of things working, which is why i had considered swapping st...

thats good to know, did you need to add any relays ect or was it just plug and play? my understanding was the loom wouldnt be there as my car didnt come with electrically operated seats and only the airbag and load sensor loom would be there (from what ive read anyway) so are you saying yours was th...

After deciding not to trade my b6 in ive decided I will actually start getting how i wanted it my biggest gripe with the r line is the poverty spec interior. now ive found this http://www.ebay.co.uk/itm/Volkswagen-Passat-B6-Leather-Interior-Heated-Seat-/332154688296?hash=item4d55f65328:g:CMUAAOSwdGF...

I've given up with mine and admitted defeat will get it into a garage one day this week to fit em manages to get the motor wound back and everything else done fine but just couldn't budge the carier bolts no matter how hard I tried even soaked in plus gas and bar sat on them:(

Had mot done few weeks back and all four discs where a advisory so too advantage of the euro carboart sale and got fronts andvrears ordered fitted fronts with no issues come to rears and I'm stuck 1. What domi need to getbrear carrier bolts off I'd assumed tgey would be a bolt like the front but it ...