UKPassats

Thank you, much appreciated

Are they sort of plug and play I wouldn't mind upgrading from the factory fit cd/tape double, I recently received the kufatec harness for the cruise don't suppose you have there wiring diagram for it, the wires are marked with the pin numbers which looks straight forward , but there is also a plug I...

Nice cars, what double din head unit do you have it the passat?

Cheers ordered one

I checked with kufatec, your right it's about £20 for the harness but like £30 for postage but steep, I've got the same harness with the one I bought but I think it has the wrong shape pins as there flat (small spade) kufatec one looks like round pins, I'm thinking I could just splice into the wire ...

Nice one thanks, I'll look up for the harness

Hi all

Anyone know why the pictures dont show anymore or the how to section, has anyone retro fitted cruise fitting the staulk looks straight forward enough does anyone know what wires you have to splice into or re pin

Cheers

I'm assuming the mechanic checked the aux belt tensioner and also the alt pulley clutch these can cause vibration and noise

yes it smooth when in 5th and cruising, stop at traffic lights and its there. you can feel it when accelerating through the gears slightly, its smoother if I put my foot down, so the higher the revs, the smoother it feels .. Sent from my SM-G960F using Tapatalk Do you feel it through the clutch ped...

Does it run well? I've heard of people experiencing issues with the injector wiring harness that breaks down as it runs through the rocker box can cause many of problems, mine is still OK at 207k but I know its definitely an issue that will arise.

Regards

Mark

Gazwould wrote: ↑Sun Feb 28, 2021 8:17 pm Yes , slightly bigger speaker .

Connector also required .

viewtopic.php?t=78552

Cheers Gaz, but more involved than first thought

Afternoon all Could anyone tell me if I buy a replacement set of rear door speakers, (rear n/s one blown) would I need to change the tweeters to them also, do they wire in through the oe speakers, thinking of these ones, not sure if I will need adapter plates as well. https://www.amazon.co.uk/dp/B0...

PSimmo wrote: ↑Sun Feb 28, 2021 6:52 pm I've had a rear door speaker replaced without having the change the tweeter, you only have to change the tweeter if thats blown too ..

Sent from my SM-G960F using Tapatalk

Thanks I'll just do the speakers then

Thanks all ordered some

Afternoon all Could anyone tell me if I buy a replacement set of rear door speakers, (rear n/s one blown) would I need to change the tweeters to them also, do they wire in through the oe speakers, thinking of these ones, not sure if I will need adapter plates as well. https://www.amazon.co.uk/dp/B07...

Thanks guys, reason I ask carparts and euro list different callipers for the two disc sizes and the 288 calliper is fair bit more expensive thanks again

Does anybody know if you have to order specific front callipers for the smaller disc diameter 288 or are they the same.. parts sites shows two types.2003 passat estate Many thanks

nice one

Thanks

Think it's 8mm that's needed. Some people just let the lock carrier hang, or support it from underneath etc. Just ensure air con pipework isn't stretched. Sent from my SM-G955F using Tapatalk Don't suppose you can tell me if you have to remove the bonnet lock mechanism, or disconnect from a join to...

Thanks gents.

I went to wickes only over the road. Appreciate your help.

Thank you

Thank you, i was hoping only to see ome size of guide on that advert but they have both m8 and M10, I think now looking on about on forums it's M8 plan is just to buy some long coach bolts or threaded bar to keep cost down.

Cheers

Evening, Please could any body tell me what size threaded bar you need to put in place to achieve service position on the b5.5 front ends, is it M10? also anyone remember what the bolts sizes for the crash bar are on the front end are they T45? Do you put the threaded bar in place of the one of the ...

Cheers Bob