Search found 75 matches
- Mon Jan 16, 2017 9:14 pm
- Forum: B6/CC PASSATS
- Topic: P2015 dieselgeek bracket
- Replies: 16
- Views: 4041
Re: P2015 dieselgeek bracket
Hi Jim, you're correct, they even use links to your videos, it makes it look like they are your distributors in this and other countries. I've not ordered anything yet cause I'm going to have a proper look at it next weekend. Maybe you could get in touch with the forum admins to set up a distributio...
- Sat Jan 14, 2017 9:01 am
- Forum: B6/CC PASSATS
- Topic: P2015 dieselgeek bracket
- Replies: 16
- Views: 4041
Re: P2015 dieselgeek bracket
A slightly positive note, it's got the aluminum manifold.
I'll get one ordered and report back on it when I have fitted it.
Thanks for the advice and comments.
I'll get one ordered and report back on it when I have fitted it.
Thanks for the advice and comments.
- Fri Jan 13, 2017 10:19 pm
- Forum: B6/CC PASSATS
- Topic: P2015 dieselgeek bracket
- Replies: 16
- Views: 4041
Re: P2015 dieselgeek bracket
Many thanks for that, I'd almost made up my mind and you have helped convince me.
Just need to check which manifold I have.
There are some on eBay posted from the UK so I might look at one of those, they say they are'genuine'.
Just need to check which manifold I have.
There are some on eBay posted from the UK so I might look at one of those, they say they are'genuine'.
- Fri Jan 13, 2017 7:00 pm
- Forum: B6/CC PASSATS
- Topic: P2015 dieselgeek bracket
- Replies: 16
- Views: 4041
Re: P2015 dieselgeek bracket
Ha, I think you are right.
- Fri Jan 13, 2017 6:08 pm
- Forum: B6/CC PASSATS
- Topic: P2015 dieselgeek bracket
- Replies: 16
- Views: 4041
P2015 dieselgeek bracket
Hi, Has anyone any experience of the dieselgeek bracket? Is it a quick delivery and does it work? Is there any visual checks that I could do to diagnose the problem? Bleeding car has just come up with the P2015 07E8 Intake manifold runner position sensor switch circuit range performance bank 1a err...
- Sun Nov 29, 2015 9:18 pm
- Forum: B6/CC PASSATS
- Topic: Passat CC boot latch problem
- Replies: 2
- Views: 2966
Re: Passat CC boot latch problem
The wiring harness in the boot is a common problem. Mine was faulty and it gave light faults. £38 for the loom and VW want two hours labour to replace it! Not a difficult task and I did it myself in under an hour and that was being cautious cause I didn't know how to do it. The hydraulic strut that...
- Wed Nov 18, 2015 10:16 pm
- Forum: B6/CC PASSATS
- Topic: Electrical VCDS Guru required!
- Replies: 16
- Views: 2802
Re: Electrical VCDS Guru required!
Well, begger me! I decided to go to the dealership and let them diagnose the problem. Turns out my initial instinct was right, it is the boot lid wiring loom. The diagnosis was £51 inc vat and the part was £38 inc vat with two hours labour quoted at £204!! They will knock off the price of the dia...
- Fri Nov 13, 2015 8:15 pm
- Forum: B6/CC PASSATS
- Topic: VW released link to check your vin for emissions recall
- Replies: 80
- Views: 16244
Re: VW released link to check your vin for emissions recall
Ha, like so many of you, my 08 was clear according to the vw link but I got the letter in the post this week saying it is affected and they will be in touch to rectify the problem soon.
- Sat Oct 31, 2015 6:53 pm
- Forum: B6/CC PASSATS
- Topic: Electrical VCDS Guru required!
- Replies: 16
- Views: 2802
Re: Electrical VCDS Guru required!
Thanks for your replies, I've had the car for 4 years and it's not had a towbar, always serviced by vw, I've never changed any coding and the fault has never appeared before. My neighbor has vcds and has run a scan and cleared the error about the module but it came back straight away. The only thing...
- Sat Oct 31, 2015 2:00 pm
- Forum: B6/CC PASSATS
- Topic: Electrical VCDS Guru required!
- Replies: 16
- Views: 2802
Re: Electrical VCDS Guru required!
I don't suppose anyone has the breakdown of which colour connector block is for which light etc. in the left hand rear wheel well for the boot wiring loom? It would make identifying which cable is the potentially faulty one. All the cables are brown so its not that easy to trace. The connector block...
- Fri Oct 30, 2015 4:03 pm
- Forum: B6/CC PASSATS
- Topic: Electrical VCDS Guru required!
- Replies: 16
- Views: 2802
Re: Electrical VCDS Guru required!
Thanks but it's never been changed in all the time I've had the car.
I'm going to have a look at the wiring harness in the boot area as there are reports of this failing due to stress fractures in the cables around the area as it leaves the boot lid.
I'm going to have a look at the wiring harness in the boot area as there are reports of this failing due to stress fractures in the cables around the area as it leaves the boot lid.
- Mon Oct 26, 2015 8:47 pm
- Forum: B6/CC PASSATS
- Topic: Electrical VCDS Guru required!
- Replies: 16
- Views: 2802
Re: Electrical VCDS Guru required!
Hi Karl,
I've ordered the one you suggested.
I've also tried sending you a pm but not too sure if it's gone.
Hopefully it will be able to fix it.
I'm looking for a simple guide to download and upload the current module settings without killing the car. Anyone got one?
Cheers
Chris
I've ordered the one you suggested.
I've also tried sending you a pm but not too sure if it's gone.
Hopefully it will be able to fix it.
I'm looking for a simple guide to download and upload the current module settings without killing the car. Anyone got one?
Cheers
Chris
- Sat Oct 24, 2015 6:14 pm
- Forum: B6/CC PASSATS
- Topic: Electrical VCDS Guru required!
- Replies: 16
- Views: 2802
Re: Electrical VCDS Guru required!
Obviously I won't hold you to it but In your opinion is it likely to be the module rather than a broken cable? I was a little surprised by the voltage at the working neighboring bulb being so low, do you think that could that be indicative of a failing module? I've never been a fan of electrics and ...
- Sat Oct 24, 2015 2:22 pm
- Forum: B6/CC PASSATS
- Topic: Electrical VCDS Guru required!
- Replies: 16
- Views: 2802
Re: Electrical VCDS Guru required!
Oh well,that didn't go too good.
Cleaned all the contacts etc. But no change.
No voltage at the offending holder, the other holder that works has 2.4v
Anyone know if that is right?
Not too sure what to do next.
Looks like I may have to go to the dealers unless anyone has any other idea?
Cleaned all the contacts etc. But no change.
No voltage at the offending holder, the other holder that works has 2.4v
Anyone know if that is right?
Not too sure what to do next.
Looks like I may have to go to the dealers unless anyone has any other idea?
- Sat Oct 24, 2015 11:24 am
- Forum: B6/CC PASSATS
- Topic: Electrical VCDS Guru required!
- Replies: 16
- Views: 2802
Re: Electrical VCDS Guru required!
Thanks Karl, I can't see any obvious corrosion on the contacts, just about to buy some contact cleaner. I am going to try to check the power is getting to the board and your diagram will help identifying the correct supply line. Thanks, I'll post my findings. worst case scenario, is it a dealer only...
- Fri Oct 23, 2015 4:12 pm
- Forum: B6/CC PASSATS
- Topic: Electrical VCDS Guru required!
- Replies: 16
- Views: 2802
Electrical VCDS Guru required!
OK, 2008 Passat CC, located Warrington Cheshire. Right hand rear sidelight not working on the outer bulb of the inner light cluster. Changed the bulb thinking this would be easy but it still doesn't light up and the error still comes up on the MFD! Checked the bulb off the car by supplying power to ...
- Tue Jun 16, 2015 6:24 pm
- Forum: B6/CC PASSATS
- Topic: Advice needed re- Rear Shocks.
- Replies: 7
- Views: 1540
Re: Advice needed re- Rear Shocks.
I wish mine only cost £85, try £280 just cause they're electronic.
Easy enough to fit but boy, steel bolts in aluminium housings are not the best idea, nearly gave myself a hernia undoing the bottom mount, ended up having to take the springs out to get better access and purchase on the bolt.
Easy enough to fit but boy, steel bolts in aluminium housings are not the best idea, nearly gave myself a hernia undoing the bottom mount, ended up having to take the springs out to get better access and purchase on the bolt.
- Sat Apr 11, 2015 9:46 am
- Forum: B6/CC PASSATS
- Topic: Started but died...
- Replies: 7
- Views: 1448
Re: Started but died...
To top the day off its p issing down in the Costa del Sol. [/quote]
b ugger, at least it won't affect the beer.
I can email you the error code when you get back if it's any help.
Have fun and sink a few scoops for us.
b ugger, at least it won't affect the beer.
I can email you the error code when you get back if it's any help.
Have fun and sink a few scoops for us.
- Sat Apr 11, 2015 7:43 am
- Forum: B6/CC PASSATS
- Topic: Started but died...
- Replies: 7
- Views: 1448
Re: Started but died...
Weird, mine did this a few days ago. Trying to restart it and it sounded like it was 'wheezing' for want of a better description. Went inside to get the laptop to connect it to it and gave it a try and it started as normal! The error code it recorded was something about convenience and the angle! Cl...
- Sun Dec 21, 2014 1:24 pm
- Forum: B6/CC PASSATS
- Topic: Rear adaptive shock absorber leaking
- Replies: 3
- Views: 1325
Re: Rear adaptive shock absorber leaking
Thanks Karl, I couldn't find any reference when I looked, I knew someone out there would be able to help.
I was intending replacing both and was going to do it myself.
Will take some photos and post them up when I get around to it.
I was intending replacing both and was going to do it myself.
Will take some photos and post them up when I get around to it.
- Sun Dec 21, 2014 10:15 am
- Forum: B6/CC PASSATS
- Topic: Rear adaptive shock absorber leaking
- Replies: 3
- Views: 1325
Rear adaptive shock absorber leaking
I apparently have a misting on one of the rear shock absorbers and I can't find any idea of level of difficulty for fitting or price online for a replacement unit.
Has anyone here any experience of this and idea of cost?
2008 Passat CC 140 GT
cheers
Has anyone here any experience of this and idea of cost?
2008 Passat CC 140 GT
cheers
- Sun Nov 30, 2014 7:59 pm
- Forum: B6/CC PASSATS
- Topic: CC GT Wind Noise
- Replies: 6
- Views: 1976
Re: CC GT Wind Noise
The only wind noises that I notice in my CC GT aren't anything to do with the car, more the occupants, it's like the scene from Blazing saddles sometimes.
- Sat Aug 30, 2014 4:04 pm
- Forum: B6/CC PASSATS
- Topic: Another EPB issue with VCDS codes
- Replies: 7
- Views: 1826
Re: Another EPB issue with VCDS codes
That was fun! Passed the car to a local mechanic to fit the new caliper and at the end of the week  he told me he couldnt do it as his reader wouldnt release or apply the handbrake. I should have taken the advice on here as I have now replaced the caliper and used the vcds as per the instructions a...
- Mon Aug 25, 2014 4:20 pm
- Forum: B6/CC PASSATS
- Topic: Another EPB issue with VCDS codes
- Replies: 7
- Views: 1826
Re: Another EPB issue with VCDS codes
I'm taking the easy way out as I don't really have any spare time to remove and bleed etc. Local mechanic is going to do it for me.
- Sun Aug 24, 2014 11:30 am
- Forum: B6/CC PASSATS
- Topic: Another EPB issue with VCDS codes
- Replies: 7
- Views: 1826
Re: Another EPB issue with VCDS codes
Buying a new motor/caliper and was wondering if there is anyone local to Warrington that could 'supervise/oversee' the vcds side of this for me? A bit of a chicken where 'new fangled' technology is concerned, rebuilt motors etc in the past but this new tech is just that.