UKPassats

Thanx Toonmania.
Will order repair kit (paint) today. I thought there was such a kit, thanx for the link
Wish you safe n happy motoring.
Al Davis (Germany)

Hello all out there.
I have a similar problem with my rear screen heater. It looks like someone has removed a company logo/sign with a sharp object and damaged the resistor (wires!) is there a repair kit to bridge the gap?
Thanx in advance.
Al

If it is water it could be coming in where the bonnet cable goes through the bulkhead next to the ecu or for a door panel on the drivers side front or rear can leak Hope you get it sorted :-bd Paul Thanx mate, but I also cleaned and added extra sealant to this area when I cleaned plenum chamber. Ge...

Check under your drivers seat as that is where the Auto ecu is and see if it is wet/damp under the carpet the unit might just have got some damp on it, also might be worth sliding underneath the car and checking the connections for solenoids. Have you done a scan on the car? if not it might be wort...

130 passat auto box keeps going into limp mode especially after selecting reverse, switch off, start up again and all ok for a while. Car just turned 100,000 miles last week and was serviced regular. Need some help from fellow countrymen :ymbringiton: ~x( . Stuck over in Germany and to even ask a te...

:D What a crackin bit of advice and photo tutorial 8) Did this last weekend and discovered a pond under the battery and alarm and master cylinder :evil: the grommet under the brake cylinder is a twit to remove as a brake pipe goes through it, I just pushed a finger through the poo and woosssshh no m...

Hi Mindriot,
Just looked at the pictures of your estate, reall nice.
I was lucky my neice n her husband gave me the passat n still has uk t&t with only 99545 miles on clock (Genuine)
i Love it
Just got all the problems of registering and testing it over here but it'll be worth it.

Thanx Mindriot for quick reply,
Yeah replacement for beam pattern, I will go n check for this latch for LHD beam pattern. That would make things a lot easier n save me a few Euro too

Thanx from me tooooo!
Just got a 2002 1,9 tdi se estate yesterday and was not sure if it was a 5 or 5,5
Now about to get it ready for German (TUV) MOT.

Hi all, I have not been on here for a while since selling my lovely B3 2,0 GT estate but now i've got a 2002 1,9 tdi estate Auto with tiptronic. Drove it back from Uk to Germany yesterday n it performed great :esm Few things I must do for German TUV (MOT) first for me is headlamp swop, someone said ...

Thanx shavey, will look on there the morrow.

Thanx Shavey, got parts over here 25 Euro each. Biggest problem I have here is somewhere to do it (not so good on the roadside) Done loads on trucks (easy) but not with Discs. BFN.

Thanx bazzateer, i'll give it a look

Hi all, I need to replace at least one of my rear bearings (noisy) but after reading all of these very helpfull posts i've chickened out and think i'll give it to my local garage and let them fit em

Hi, I would like to have a workshop manual for my 1991 Passat 2.0 GT. Haynes or similar. Will need to be posted to Germany.
Thanx, Al

Hi all, I'm living in Germany and often travel to the UK (East Anglia) last trip two weeks ago and clock now reading over 300,000KM in my 1991 B3 Passat wagon always a laugh with my registration number, BO NK 69

I want some too! I'm coming over to the UK next week (Lowestoft) On route my B3 will turn the 300,000 Km.
Always great fun to visit and pick up parts.
1991 2.0GT 2E estate Reg # BO NK 69

1991 2.0 GT estate in black, 266,800km. Reg' # BO NK 69

It's really difficult to follow my w/s manual as it's in German Almost any condition will do as long as it's in English, Req posting to Germany. Thanx.

Ooooops! sorry Joe. Hi ratlookrob, Picture of the breather hose would be good as there are two different forms but both have the same part # 037103493p. The hose fitted to my car is one piece and flares out at the bottm end. When it's in good condition please let me know how much it is inc' post to ...

Hi Polo_Joe.
What engine is fitted? I need a breather hose for a 2E.

Thanx, Al Davis

Hi, I'm looking for a breathe hose 037103493p for my 1991 2.0GT estate.

torque777 wrote:HI and welcome to ukp

Thanx

water01 wrote:Hello and Welcome to UKP.

Can I suggest you ask that question in the B3/B4 forum?

Thanx mate

vwnutant wrote:welcome to ukp



ant

Thanx.