UKPassats

Many Thanks will take a look tomorrow am.

Evening all I feel I may be missing something but ive replaced my rear passenger caliper as the handbrake didn't release fully so the pads were binding. My issue is after I've bled the brake system although the brakes work great the parking brake when applied works better on the drivers side than th...

This is just the actuator for the anti shudder valve.

If thats what is it then yes. I'm just trying to describe what it does as I dint have a the correct description for it. Thank you for your reply.

Can anyone point me in the right direction for a replacement actuator that controls the butterfly valve before the egr valve?

Neil

Thank you all for your reply. I have access to a cnc mill so will have the slots put into it.

Does anyone have the dimensions to hand so i can fabricate my own blanking plate before I take it appart?

Yeah I've already taken one out to get the correct length etc. Thanks for the advice though much appreciated.

Many many thanks.
top man

Evening gents. I posted about this before and im going to see if I can sort it. I'm going get new glow plugs and relay and see what happens then. My question is what glow plugs do I go for? There are 2 sizes 27mm I think and 30mm my engine is the AWX PD130. Also I have changed the cts for a genuine ...

Is there anyone who can supply, fit and activate cruise control on my 04 b5.5 tdi pd130? I've looked at the how to guide but don't fancy it, plus I don't have a registered vcds.

Hmmm I was thinking that one could be faulty so the fuel doesn't combust properly? I've tried injector cleaner but no improvement. So next was the glow plugs.

How do I test the glow plugs are working correctly with Vcds? I have no lights or fault codes. But the exhaust whiff is worse when just started or when sat idle.
I have read that the glow plugs work quite a bit when the engine isn't under load as it cools quite quickly.

http://i237.photobucket.com/albums/ff180/squirt065/Mobile%20Uploads/20151007_053034.jpg Had this on all the way to work with my passenger watching it. This was pretty much the only readings and they didn't really change. . Not sure where to look now. I fitted a new fuel filter this evening with die...

I'm going to get some injector cleaner and a new fuel filter on my way home from work today and see if that improves anything. Will fill the filter with cleaner and the rest in the tank.

Overall deviation is 2.05 as one is negative and the other value is positive.

OK will give it a go on my way to work as it's a 32 mile commute. As they seem ok I can assume the injectors are all good? Everything else functions as it should. So for the whiffy smell im still lost.

I have scanned it with Vcds and appart from the a/c pressure switch and interior sensors and rear window not working correctly. There were no other codes. http://i237.photobucket.com/albums/ff180/squirt065/Mobile%20Uploads/2015-10-06%2022.55.28.jpg I did check the cylinders for fuel quantity well I ...

Thanks for all the helpfull replies guys. Will get it scanned with Vcds ASAP. Thanks.

Does anyone have any idea why it splutters when cold like a petrol does with a miss fire?

I have changed the cts and have checked it on the climate control and it reads correctly.

I have changed the cts and have checked it on the climate control and it reads correctly.

Just ticked over 140k

Gazwould wrote:Rare for 130 PD .

Loom breaking down and glow plugs more common .

I don't have any warning lights to indicate faulty glow plugs. Where does the loom break down?

I think I have a dodgy I injector??? When I start from cold it seems to splutter like a petrol would with a miss fire but only for a short time then it stops. Is there any way of testing the injectors? Or is it better to replace them??