UKPassats

Blue b5 saloon lowered on standard wheels at the burger van outside my work. Gallows corner Romford. Ukp sticker in the rear quarter

This is just on another level. Top work man

This looks spot on dude. Had some of those wheels on my first car a mk2 breadvan polo.

I might just put 12v into them both n see what happens haha. Would make sense though

I have heated leather in my b4 but the previous owner didn't get the loom when he fitted the seats. I have got myself a loom and the plug is correct for the bottom of the seat and the switch but: There are 3 wires with plugs that I'm guessing go to the fuse box to supply power to the heat pad. 1 is ...

You don't need an sot-976 for this car as it uses standard iso.

When you turn the kit off it should say goodbye if it doesn't then the fuses are the wrong way round

Check out kenwood for double din units with dab and nav plus works with your phone. They've got a few units out.

Also I'm fairly sure you'll need to run an ignition live to your fuse box for the stereo as your car has two permentant lives going to the factory fitted unit. So on the harness you will need to disconnect the ignition wire and connect that to your fuse box.

To watch videos in motion all you need to do is connect the handbrake/parking wire ( I believe it's green on the app radios) to the stereos earth and hey presto job done .

Try unplugging your coolant temperature sender then starting it. I had a very similar problem with a 6n polo I had.

Very randomly I tried disconnecting my tuning box (even though it wasnt turned on) tried starting it and it runs like a dream again

1.9tdi 1z but I believe I've sorted it now

Went to start car this morning and it started but run very lumpy, revs going high then low and not settling. I thought it might sort itself out when I drove it but alas no. Got probably 200 yards from my house and it died, Every time I tried to start it it starts revs up to around 3k then dies. A co...

I'm running 16x8's atm and think they fill the arches much nicer than my old 15x7.5's. can see pics of both set ups on my build thread. I just wish the rear beams were wider so I didn't need to get such big spacers. I've currently got 10mm spacers and wheels are et25 but they still sit to far in for...

Just wow. They look awesome dude. Good work!

I know someone selling a silver b4 estate for £650ish. Some rust on arches but looks fairly straight I believe.

Sweet looking wagon dude

That looks awesome. So it's basically an all in one? How much?

Take a look at my thread dude. I'm running 16x8 et25 compomotive monos. 10mm spacers on the rear and they still don't come anywhere near arches and they sit spot on at front. My car sits on bump stops at front so is quite low.

You say that but she's had em like that for a while and regularly snow foams/jet washes them haha. I follow her on Instagram it's her bf's old car as he's now got a stupidly low static mk6 gti with 300bhp and same wheels but polished

That's ok just thought I'd let ya know lol.

I don't really know I think it's sprayed on from a gun. Abit like powder coating the wheel is electrically charged then sprayed with the flock.

The wheels are flocked actually dude btw

Looking good dude . Box looks spot on simple and classy just like the whole car.

Weres that breakers? I need the wings from that car lol

This looks awesome. Only a tad jeleous lol