UKPassats

Thanks Karl.

Are you saying that you need both the rubber seals and the metal plate or, one or the other.
This is a pic of the pump when i had it off looking for a part number, so i'm guessing i should use the rubber seals.

Hi All,

The vaccum outlet pipe on my tandem pump (Pt - 038145209A) is extremely loose/worn and I want to replace it, but dont want to have the same problem again.
Do I need to get a tandem pump specific to my awx PD130 engine or are the pumps universal across the PD range ?

Cheers,
Brucie.

the codes were cleared before setting off home from doncaster.
Will try to get the codes checked again up here.

gortex wrote:have you cleared the codes after you fitted new loom???

if not clear them drive the car and after it judders again see if it gives same codes.

Already Done That !

howey wrote:you need to replace the wiring loom for the injectors inside the head bout £45 from dealer

Nice one,

But what does that mean in english (for dummies like me) ?

gortex wrote:this is what i found:

(P1267) Valve for pump injector cylinder 3 N242 Control limit exceeded



(P1270) - 006
Unit Injecor solenoid valve - cylinder 4 N243
Value above upper control limit - Intermittent

ARRGGGHHHHHHHHHHH ~x( Recently I have had the Esp light come on my dash and the car feels like its juddering. The Juddering is more when holding revs constant. After a bit of detective work on the forum and by the advice of a local spanner monkey, I replaced the Injector wiring harness and all seeme...

Hi folks,

Anyone know what the part numbers are for the O-ring style seals and Horseshoe style clips for the intercooler pipes on 2002 1.9 Tdi 130 Passat.
Or know of where to get them other than the Stealerships?

Cheers,
Brucie.

Anyone know what the difference is between these N75 Valves.
1j0 906 627 A
&
1j0 906 627 B
Please don't say just the last letter

I ask as I purchased a 1j0 906 627 A from EvilBay but the seller has sent me the wrong one and I just wondered what the difference was.

Cheers.
Lee

Cheers for the advice, I'll have a good look at the weekend.

Hi all, I've got 2 things that are bugging me at the min. Do these things sound like a problem you've encountered or are they a common issue ? 1: Every now and again the clutch pedal seems to sink and I have to lift it with my foot, then it works fine for ages, what can cause this ? 2: I've noticed...